voice quality

[magno22]

Dears,
In 3G network, how to evaluate voice quality?

[electron]

What is your vendor?

Dears,
In 3G network, how to evaluate voice quality?

[Muhammad Imran Rafique]

lets say it is e*******, I am interested in knowing through STS (stats). Note our speech is using fixed 12.2 codec rate

[electron]

For E/// there is no counter to measure SQI in 3G just field measurement by PESQ/POLQA technique .


Cheers

lets say it is e*******, I am interested in knowing through STS (stats). Note our speech is using fixed 12.2 codec rate

[auto_art]

we use BLER to measure quality.


E/// formula=<pmFaultyTransportBlocksAcUl>/<pmTransportBlocksAcUl>*100)

[electron]

Hi,


BLER rate shows faulty transport block ratio which basically related to transmission media and network. I afraid to say it does not show SPEECH QUALITY .If you have any practical case please share to be more clear to all.


Cheers

we use BLER to measure quality.


E/// formula=<pmFaultyTransportBlocksAcUl>/<pmTransportBlocksAcUl>*100)

[auto_art]

in our case E/// recomend this to use for voice quality. I guess a good ratio of successfully decoded transport block would always indicate good health of network.

[electron]

Thanks , Would you please share the reference in Alex for this recommendation .


Cheers

in our case E/// recomend this to use for voice quality. I guess a good ratio of successfully decoded transport block would always indicate good health of network.

[magno22]

Dears,
Vendor is Huawei. our customers complain some times they are obstacle can not hear voice and robotic voice in short time then call is continuously normal. How can i detect this problem?

[dtvt2]

You can check UL load and attempts cell update with cause for voice calls

Dears,
Vendor is Huawei. our customers complain some times they are obstacle can not hear voice and robotic voice in short time then call is continuously normal. How can i detect this problem?