-
Finding Serving Cell in E/// BSC via User IMSI
Hi guys,
Suppose we have a user IMSI and we want to see user is served by what cell in E/// BSC (Assume user is in dedicated mode). Would be appreciated if share the command sequences .
Cheers
-
2014-01-14 10:36 PM
# ADS
Circuit advertisement
-
Member
Reputation: 426
Re: Finding Serving Cell in E/// BSC via User IMSI
How about using MTR (Mobile Traffic Recording) ? There you can see not only the serving cell information but also analyze active connection etc.
Clipboard01.jpg
Dax.
-
Re: Finding Serving Cell in E/// BSC via User IMSI
I have no access to MTR in project there is another command sequences in BSC to find the user. I am looking for that.
Cheers
Originally Posted by
Darko
How about using MTR (Mobile Traffic Recording) ? There you can see not only the serving cell information but also analyze active connection etc.
Clipboard01.jpg
Dax.
-
Member
Reputation: 127
Re: Finding Serving Cell in E/// BSC via User IMSI
Can any one help how to know the serving cell for IMSI
-
Member
Reputation: 80
Re: Finding Serving Cell in E/// BSC via User IMSI
-
Member
Reputation: 29
Re: Finding Serving Cell in E/// BSC via User IMSI
dear
if your MSC is E/// also, please run this command to know the cell:
mgssp:imsi=xxxxxxxxxxxx;
-
Member
Reputation: 194
Re: Finding Serving Cell in E/// BSC via User IMSI
Hi,
Those are steps which I use to see serving cell on Ericcson MSCS
####HLR, find current MSISDN VLR
hgsdp:msisdn=xxxxxxxxxxxx,loc;
###MSCS
mgnmp:msc=all;
ctrai:msisdn=xxxxxxxxxxxx;
test system;
print var mtv xxxxx:h'147;
!MTV variable is ABCD H'dec cell code!
end test;
From previuos printout received Hexadecimal code of the serving cell.
Than convert hecadecimal code to the decimal and find it on the list of defined internal cells.
mgcep:cell=all;
reputation and thanks are welcome
-
Member
Reputation: 127
Re: Finding Serving Cell in E/// BSC via User IMSI
Dears; can you please what are the xxxxx mentioned below and from where to be obtain.
print var mtv xxxxx:h'147;
-
Member
Reputation: 194
Re: Finding Serving Cell in E/// BSC via User IMSI
####HLR#####################
<hgsdp:msisdn=xxxxxxxxxxxx,loc;
HLR SUBSCRIBER DATA
SUBSCRIBER IDENTITY
MSISDN IMSI STATE AUTHD
xxxxxxxxxxxx yyyyyyyyyyyyyyy CONNECTED AVAILABLE
NAM IMEISV
0
LOCATION DATA
VLR ADDRESS MSRN MSC NUMBER LMSID
4-xxx650120000 xxx650120000
###From one MSCS list neighbouring MSCS and find the name of serving MSCS###############################
<mgnmp:msc=all;
MT NEIGHBOURING MSC DATA
MSC MSCADDR R MSCCAPA
VXX03S 4-xxx650120000 4MHOC1 MAPV-3
#### Connect with MML on serving MSCS VXX03S######################
WO VXX03S
<ctrai:msisdn=xxxxxxxxxxxx;
CALL PATH TRACING
XSS TRACING
IDX SWDEV DEV DEVIDX FID ENV SV
1 MTV-135964 H'0000 0001
#########On serving MSCS START TRACE ON MTV BLOCK RECEIVED FROM CTRAI: MTV-135964##################
<test system;
EXECUTED
<print var mtv 135964:h'147;
VARIABLE
MTV VAR H'02 131C:H'147=H'3AA0
END
<end test;
ORDERED
###### H'3AA0 is the cell code in hexadecimal format, DECIMAL=15008 ################
#### Again on serving MSCS list all internal cells and find Cell ID, example CID 15008##################<mgcep:cell=all;
MT CELL DATA
CELL CGI BSC CO RO NCS EA
XXXXA xxx-xxx-xxxxx-15008 ABCD 0 0 0
Hope that is clear now.
Regards
-
Junior Member
Reputation: 10
Re: Finding Serving Cell in E/// BSC via User IMSI
Hi Consultant,
Would you say what H'147 is in the command?
Is it common for all operators or it depends on certain values?
Bookmarks