-
Senior Member
Reputation: 379
LTE Poor SINR and Interference issue Optimization
Hi All,
Can anyone share on the experience of determine the Interference in LTE Network Optimization? Could anyone share how does the criteria of Interference are happening in LTE network? SINR<0? More than how many listed cell in the same point are defined as problematic area of interference? Any others measurement parameter shall we look into for this case?
thank you
Default Password:finetopix
-
2013-11-19 12:00 AM
# ADS
Circuit advertisement
-
Member
Reputation: 17
Re: LTE Poor SINR and Interference issue Optimization
Is it interference or elevated Noise? your KPIs should show you >-92 dBm. what system is this E///?
-
Member
Reputation: 17
Re: LTE Poor SINR and Interference issue Optimization
SINR affect your CQi.. anything below 10 will not have a good QAM ..try and control RF overshoots/ DT/ change -out antennas - use higher gain (8ft if possible) . try and have 1 dominant server in poor RF . adjust your qRXlevmin. try and h/o to 3G wherever possible at the edge of coverage (IRAT)
-
Senior Member
Reputation: 379
Re: LTE Poor SINR and Interference issue Optimization
Originally Posted by
yb4in
SINR affect your CQi.. anything below 10 will not have a good QAM ..try and control RF overshoots/ DT/ change -out antennas - use higher gain (8ft if possible) . try and have 1 dominant server in poor RF . adjust your qRXlevmin. try and h/o to 3G wherever possible at the edge of coverage (IRAT)
Hi sir,I am working with huawei equipment, just wanted to know is there any criteria of pilot pollution like (UMTS: >4th serving cell are in the range of 6dB then its consider the 4th and above cell are pollutant). For LTE, do we have any criteria like this? thank you
Default Password:finetopix
Bookmarks