GPEH Analysis

[jason182]

I tested Agileto but doesn't work !!!

[mihail]

Hi jason182,

It's curious why it is not working for you as far as I used this Agileto's feature a lot and it is working great for me. Can you say what is not working for you?

What version of Agileto do you use? I may try to help you if you provide few sample GPEH traces files in order to test them on my PC...

[jason182]

HI,

I have an error when I tried to open the files, I attached you 2 samples ...

[mihail]

Hi jason182,

I understand why you can not do the work. Before collecting the GPEH traces from OMC (by default as *.bin format files) you need to convert the GPEH traces to *.tab format which is the pure txt format of these traces and OMC has by default this converter available under the main menu as an option. After you do this, you collect the traces on *.tab format and then you should provide as input GPEH traces for Agileto in *.tab format. I hope you will succeed.

HI,

I have an error when I tried to open the files, I attached you 2 samples ...

[jason182]

Its doesn't work even with .tab format see enclosed

[mihail]

Hi jason182,

You do not have the right *.tab format file. The GPEH files in *.tab format should be ordinary text files (with the extension .tab) that you may see inside all the decoded messages recorded. Please see attached a sample *.tab file. Once you get the good GPEH files into the *.tab format you will be able to process them with Agileto.

Example_GPEH_tab_format_file.rar

Its doesn't work even with .tab format see enclosed

[jason182]

Hello,

You just change the tab by .txt (see attached).

Cheers

[mihail]

Hi jason182,

Yes, the file you have just sent above is the right GPEH *.tab format you should provide as input to Agileto (remember to modify the extension from *.txt to *.tab in order to be accepted as input by Agileto tool).

Hoewever, althought you send it again the same file apparently just saying that you have just changed the extension from *.tab to *.txt it looks not true for me if I open both of them into a text editor; therefore I assume that you have converted properly this time the GPEH file from the .bin format to *.tab format (txt) and the last GPEH file having the (*.tab) format you have just attached before is the good format you should provide as input for Agileto.

By the way, do you have an external tool which is able to convert the GPEH *.bin format to *.tab (txt) format (like you have proceeded with the two files attached before)? I would appreciate if you may share it...

Hello,

You just change the tab by .txt (see attached).

Cheers

[jason182]

Sorry I dont have any tool to conver .bin!!! I just prased it in the OSS

[jason182]

Hi Hi experts,

No one who can share knowledge ? Macro tool ?

Regards