-
-
2009-03-16 04:38 PM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 571
ok you have a problem did you try mcom 2005 that i posted
try and let me know
see the link
http://www.finetopix.com/showthread.php?t=1152
br hassen
-
Member
Reputation: 150
There seems to be some problem with cell "34431". Check your mapinfo table to see whether it matches with the MCOM format or not.
-
I try them
Hi guys .
thanks for the support , well u try the Mcom2005 as well as the 5.6 and 5.7 there is the same problem , sometime it accept the modification , but most of the time it didnt !!!
and its not specific for a cell !! but i used this one as a example.
it seam there is in something in the erilock.dll but i don't know . as when you check the license it say it is expired but the program is running !
any suggestion
-
VIP Member
Reputation: 571
Originally Posted by
EngSoft
Hi guys .
thanks for the support , well u try the Mcom2005 as well as the 5.6 and 5.7 there is the same problem , sometime it accept the modification , but most of the time it didnt !!!
and its not specific for a cell !! but i used this one as a example.
it seam there is in something in the erilock.dll but i don't know . as when you check the license it say it is expired but the program is running !
any suggestion
yes you are right but not for mcom 2005
-
Can't ***** MCOM 5.6
I download MCOM 5.6 & ***** file, Install and copy EriLock.dll to install folder
But after run software require register
Any body can show me how to ***** MCOM 5.6.
If anybody have another ***** file( MCM5.6) pls send to me by email: javavn.phuong@gmail.com
Thanks.
-
well try again and give you the feedback ...
thanks alot hassen
-
Member
Reputation: 23
Originally Posted by
phuonglv
I download MCOM 5.6 & ***** file, Install and copy EriLock.dll to install folder
But after run software require register
Any body can show me how to ***** MCOM 5.6.
If anybody have another ***** file( MCM5.6) pls send to me by email:
javavn.phuong@gmail.com
Thanks.
Just type anything in the licience key and then press "register" you will get 180 days of use but don't worry about this period, it's always 180 days .
Bookmarks