-
Member
Reputation: 68
VSWR
hi dears
I have a problem to measuring of VSWR bye site master.
I measuring vswr but i see a strange thing.
please help me ?
what is vswr at the picture more other places ?
IMG_0092.JPG
if feeder has problem ?
thanks
i am waiting for your help
-
2013-02-18 11:39 PM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 491
Re: VSWR
You have big problem at the end of your test line
measure the distance to know where this problem exactly - I think you could get distance by checking DTF
-
Member
Reputation: 68
Re: VSWR
i checked path of feeder and didn't find problem....
can i change RX with TX from bottom antenna then measure vswr ?
-
Senior Member
Reputation: 491
Re: VSWR
was your site master snapshot when you made test with Dummy Load or without?
-
Member
Reputation: 68
Re: VSWR
when made test site master was with load. .....
if maybe antenna was broken ?/?/
-
Senior Member
Reputation: 491
Re: VSWR
site master with Load :so Antenna hasn't been included in your test"
as Load was at the end,
Am I right
-
Member
Reputation: 68
Re: VSWR
DEAR JUSTDREAM
please see below picture .....
i hope you understand that I want to explain??/
S.jpg
in this regard antenna is ok or not?
i want understand that antenna is working normaly or not?
-
Senior Member
Reputation: 491
Re: VSWR
based on your drawing:
- you didn't use load
- your site master snapshot is normal as having antenna at the end giving this chart
- Do another test but in this time connect load instead of antenna
-
Member
Reputation: 68
Re: VSWR
what do you mean from load ?
load=????
i didn't understand your mean from load???
-
Senior Member
Reputation: 491
Re: VSWR
load is Dummy load
you add at the end of you site master connections to have an accurate measurement
http://2.imimg.com/data2/BD/TC/MY-54...or-250x250.jpg
Take care and be sure not to fall it as it's very sensitive
Bookmarks