Thanks Thanks:  2
Showing results 1 to 4 of 4

Thread: High DCR due to high IRAT FR

  1. #1
    Member Reputation: 341
    Join Date
    2012-08-06
    Location
    Europe
    Posts
    220


    Default High DCR due to high IRAT FR

    Hi all,
    I need an help...I'm having a problem with a cell...after the swap from NSN to Huawei I'm having a greater coverage ( propagation delay checcked before and after the swap ) and also an higher CS DCR...actually I've checked all and everything is ok except the IRAT FR with the co-located GSM cell that is high.
    Is there someone who could kindly suggest me some parameters to change in order to improve the IRAT succesfull rate ?
    without losing traffic on 3G as customer doesn't want this .
    Thanks in adavance.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Member Reputation: 341
    Join Date
    2012-08-06
    Location
    Europe
    Posts
    220


    Default Re: High DCR due to high IRAT FR

    already checked and there is no mistakes in the parameters as I'm having problem only on this cell of the site...and the cofiguration is ok

  4. #3
    Member Reputation: 87
    Join Date
    2010-08-04
    Location
    Near here
    Posts
    21


    1 out of 1 members found this post helpful.

    Default Re: High DCR due to high IRAT FR

    Do a UEXT2GCELL & check correct BCCH / BSIC etc. Double check in BSC it is same.
    Check U2GNCELL for the neighbour relation and see if it is ok.
    Check UCELLINTERRATHOCOV is blank or same as other cells.

    If there is IRAT HO between UMTS & GSM cells just poor have you checked for crossed fibre / feeders on site? Is the GSM perf normal pre / post swap? Has the GSM been swapped too?

    In my case majority were crossed fibre / feeder from particular swap team......and datafill errors.

    Check for congestion in 2G cell also failure counters too.

    Hope that its some use but you have prob already tried all of the above...good luck

    BR
    Last edited by bawbag11; 2013-02-13 at 08:22 AM

  5. #4
    Member Reputation: 341
    Join Date
    2012-08-06
    Location
    Europe
    Posts
    220


    Default Re: High DCR due to high IRAT FR

    Yes...I'm agree with you but not in this situation
    Quote Originally Posted by bawbag11 View Post
    Do a UEXT2GCELL & check correct BCCH / BSIC etc. Double check in BSC it is same.
    Check U2GNCELL for the neighbour relation and see if it is ok.
    Check UCELLINTERRATHOCOV is blank or same as other cells.

    If there is IRAT HO between UMTS & GSM cells just poor have you checked for crossed fibre / feeders on site? Is the GSM perf normal pre / post swap? Has the GSM been swapped too?

    In my case majority were crossed fibre / feeder from particular swap team......and datafill errors.

    Check for congestion in 2G cell also failure counters too.

    Hope that its some use but you have prob already tried all of the above...good luck

    BR
    Last edited by Handover24; 2013-02-13 at 06:52 PM

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •