Problem with OMT all verisons

[spiderman]

You maybe using Bafo USB to 2 Serial Port Bro?
I think your problem on your cable if you this cable.
Thanks

[cool_guy4ever15]

hi spiderman,

what is BAFO USB to serial port, this cable works with me on hyperteminall with 3G without any troubles, can you please give me any solution to the problem

[rama1234]

i think the port is not configure

[spiderman]

hi spiderman,

what is BAFO USB to serial port, this cable works with me on hyperteminall with 3G without any troubles, can you please give me any solution to the problem

It was pin connection corrected bro?
in many case i found not all usb to serial cable compatible with OMT/Hyperterminal.
If any friends can be connected using this cable to hyperterminal and OMT, used that.
Compare with your cable pin connection.

Thanks

[fjg50425]

I had the same problem, but because my cable was wrong, finally I used as follow:

db9m to db9f

1 -> 1
1 -> 1
1 -> 1
2 -> 2
3 -> 3
4 -> 4
5 -> 5
6 -> 6
7 -> 7
8 -> 8
9 -> 9

after I correct that it works perfect.

Regards.

[mouroalgarvio]

Same problem, i use also the xp mode on wind 7

[yousef85]

FROM OMT TOOLS CHOOSE THE port of the USB to serial and make it disable ,then close omt and reopen again

[Aidoooo]

Hi, I had the same problem and the solution is to start by un-installing the driver for the usb to serial adapter then before re installing it or a prolific usb to serial driver you must right click the executable file and select properties then select compatability and select XP and also tick the box run as administrator, you must repeat this when installing OMT. It will not connect the first time you must restart your laptop with the cable connected after first attempt. It works perfectly, I have all my old programs running on windows 7 this way.

[wilmer]

you may also check the version of your windows 7 OS. my friend used to run windows 7 64bit and he's having the same problem as you. when he change his OS to windows 7 32bit it works perfectly. hopes this will be of help.

[william.dg08]

you may also check the version of your windows 7 OS. my friend used to run windows 7 64bit and he's having the same problem as you. when he change his OS to windows 7 32bit it works perfectly. hopes this will be of help.

Hi try that @Aidoooo said.. Always change in properties , select compatibility and choose WINDOWS XP SP3 and run as administrator.. u have to change all exe files in your application. Besides when you install u application.