Huawei B260A sms support

[probabaja]

Does Huawei B260A (3G wifi router) support sending SMS using AT command?
I can read sms, but i can't send them.
AT+CMGF=1 OK
AT+CMGS=<number><CR><message><CTRL-Z> don't work
Tnx!

[zefs]

Here is a document with AT commands for huawei.
Personally, i have never tried sending SMSes.

HUAWEI UMTS Datacard Modem AT Command Interface Specification_V2.3.zip

[probabaja]

Tnx.
<CTRL-Z> --> modem/router freeze.
Any idea?

[zefs]

Nope, none.
Try <ESC> instead of CTRL-Z.

Please add reputation if you found the pdf useful, it's that button that looks like a scale, next to "Thanks for this post"

Thanks

[probabaja]

<esc> --> router freeze too.
I try this before too.

[zefs]

Ok, lets try a step by step approach.
1. issue AT command, result should be OK, which means the connection between the HyperTerminal program and the GSM / GPRS modem works fine.
2. issue the AT+CMGF=1 command, result should be OK, which instruct the GSM / GPRS modem to operate in SMS text mode.
3. issue AT+CMGW="+<input number here>", than hit enter, a ">" sign should be visible, input your message, to finish the message press CTRL-Z. Result should look like +CMGW: 1
4. issue AT+CMGS=1, result should be +CMGS: <a number> and OK.

If any of these commands fail, please let me know.

BR

[zefs]

If the modem does not support text mode, this is going to be a little trickier.
for more info read http://mobiletidings.com/2009/02/11/...n-the-sms-pdu/

Don't forget to add rep.

BR

[probabaja]

1. pass
2. pass
3. AT+CMGW="+12345678", than hit enter, a ">" sign should be visible, pass
input your message, pass
to finish the message press CTRL-Z. Fail Result should look like +CMGW: 1
4. issue AT+CMGS=1, result should be +CMGS: <a number> and OK.
After press CTRL-Z --> fail.
I tried this with 2 different routers.
SMS center is correct (AT+CSCA).
SIM card is correct and (SMS send) working in other modem (e1752).
This router with iplus firmware (Poland) have user interface to sms sending.
http://www.telix.pl/images/gal/2818/..._b260a_sms.jpg
My router don't have interface for sms sending.
http://images.mobilityminded.com/201...atus_574px.jpg
I can't find iplus firmware on internet.
Best regards

P.S. You must spread some Reputation around before giving it to zefs again.

[zefs]

Have you tried requesting the firmware form your operator?
Try sending a sms in PDU mode.
else ... sorry, i have no more to help you with.

[mobile4lte]

Trying to send SMS PDU mode.and you want to know more huawei b260A or more products about support sms.you want to check .