-
Junior Member
Reputation: 10
The question to the masters about Tems
The question to the masters about Tems
In the 3G operator I'm working ,2 pieces of c1 (10537) ans c2(10612) frequencies are working and has dual carrier support.My problem is ; I should get hsupa test from eul channels ,which are open in 1 carrier and 2 carrier ,with Tems 11.0.7.I mean; I am asked to get tests from each of the channels one by one.
Problem
1:When I lock the Huawei e353 modem to 1 carrier with AT commands ;2 carrier frequency is seen on Tems but cell ID of 1 carrier is observed.The trace from RNC also verifies it is on 1 carrier but Tems 11.0.7 shows wrong frequency.How can I solve this?
2:In tests which I am doing with 3G USB modem; during recording tems shows cellID but when I play the recorded log it does not show the cellID .Where else can I send the CellID from?
3: Could u recommend me a modem which I can use in tems 11.0.7 ;doesn't suport multi or dual carriers but supports 5.76 mpbs hsupa and also I can lock to carriers?
-
2012-09-25 07:21 PM
# ADS
Circuit advertisement
-
Member
Reputation: 158
Re: The question to the masters about Tems
Shuttle instead of changing the modem change your software to NEMO.
With NEMO you can lock it in carrier or cell.
BR
-
Junior Member
Reputation: 10
Re: The question to the masters about Tems
Originally Posted by
sedicla
Shuttle instead of changing the modem change your software to NEMO.
With NEMO you can lock it in carrier or cell.
BR
I must use tems İnvestigation 11.0.7
Bookmarks