NCP/CCP/ALCAP Bandwidth?

[jayk]

Hola experts, To calculate Utilization of NCP, CCP and ALCAP , we need the bandwidth assigned to each of these signalling links. Please specify the parameters or mml commands to define bandwidth of these links. vendor is Huawei. Saluds, jack.

[miri]

Hi,
You have to reconfigure the corresponding SAAL links: MOD SAALLNK. There you have peak or sustain cell rates.

PS, Reputation would be appreciated.

[jayk]

Hello Miri, I could not spot the Bandwidth Define Parameter in the command mentioned by you. Here I have pasted an example. Please tell the parameter. jack

%%LST SAALLNK: SRN=1, SN=2, SAALLNKN=3, LstFormat=VERTICAL;%%
List SAAL Link
--------------
Subrack No. = 1
Subrack name = SIG
Slot No. = 2
SAAL link No. = 3
Bearing type = NCOPT
Bearing subrack No. = 0
Bearing slot No. = 23
Bearing UNI link No. = <NULL>
Bearing IMA group No. = <NULL>
Bearing FRAATM link No. = <NULL>
Bearing NCOPT port No. = 0
Bearing VPI = 2
Bearing VCI = 110
TX traffic record index = 102
RX traffic record index = 102
Interface type = NNI
Management proving status = MPS_NEUTRAL
Timer_CC = 200
Timer_Poll = 100
Timer_Idle = 500
Timer_No-Response = 1500
Timer_Keep-Alive = 100
Timer T1 = 2
Timer T2 = 30
Timer T3 = 10
Timer_REPEAT-SREC = 60
Timer_NO-CREDIT = 1500
Max_NRP = 0
MaxCC = 4
Max Poll Data Count = 500
MaxSTAT = 67
N1 = 100
Receiving window size = 100

Hi,
You have to reconfigure the corresponding SAAL links: MOD SAALLNK. There you have peak or sustain cell rates.

PS, Reputation would be appreciated.

[miri]

Hi,
you have to look at the ATM Traffic records, with index 102:
TX traffic record index = 102
RX traffic record index = 102

Command ST ATMTRF

[jayk]

I got it now, so in this case the peak cell rate is 500kbps. It was for the ATM transmission case. How about the IP interface, when we define the SCTP link?

Traffic index = 100
Service type = CBR
Peak cell rate = <NULL>
Sustainable cell rate = <NULL>
Minimum cell rate = <NULL>
Max burst size = <NULL>
Cell delay variation tolerance = 1024
Traffic use description = SAAL-IU
Peak Cell Rate(Kbps) = 500
Sustainable Cell Rate(Kbps) = <NULL>
Minimum Cell Rate(Kbps) = <NULL>