Performance Analysis of Handover Measurements and Layer 3 Filtering for Utran LTE

[dietcha]

Handover is one of the key functionalities which tries to keep a user equipment (UE) connected to the best base station (eNodeB). Handover is usually based on the downlink received signal strength (RSS) and carrier-to-interference ratio (CIR) measurements. Processing of the handover measurement is usually done in Layer 1 (LI) and Layer 3 (L3) by the UE, and handover is initiated by the serving eNodeB if certain event criteria are met. L3 filtering can be done in linear domain or decibel (dB) domain. A hard handover algorithm based on the downlink RSS and CIR measurements along with linear and dB domain L3 filtering has been studied by using a dynamic system level simulator for a 3GPP UTRAN LTE recommended scenario. The results suggest that RSS measurement with linear or dB domain L3 filtering is a better criterion for handover in terms of reduced number of handovers for a small penalty on the downlink CIR.

http://vbn.aau.dk/files/12841511/PIMRC2007_Handover.pdf