2G configuration parameters

[n.kaustubh]

Contains

Channel Configuration
Idle Mode Operation
Protocols
Radio resources
Measurements
Power Control
HO process
Intelligent Underlay Overlay
Handover Support for Coverage Enhanchements
The extended cell
Dynamic Hotspot
Dual band GSM/DCS Network Operation
Half Rate
HSCSD

[redendo]

thx to share all the training in one zipped file.
The first one shared concern channel administration topic

Kind regards

[hakimgsm]

Hi Experts;
I’ve a problem, I have a site with two sectors (A, B), BTS 312, and the actual configuration is (4 +4).
The traffic congestion in this site is around 100℅.
My question is: did the BTS 312 accept others configurations like S55, S75 AND S57 us in BTS 3012 and 3012AE.
If it’s ok, please share it.
I’m waiting for the answer, many thanks in advance.
Best regards.

thx to share all the training in one zipped file.
The first one shared concern channel administration topic

Kind regards

[desharky]

Hi Experts;
I’ve a problem, I have a site with two sectors (A, B), BTS 312, and the actual configuration is (4 +4).
The traffic congestion in this site is around 100℅.
My question is: did the BTS 312 accept others configurations like S55, S75 AND S57 us in BTS 3012 and 3012AE.
If it’s ok, please share it.
I’m waiting for the answer, many thanks in advance.
Best regards.

as my knowing.. BTS3012 and 312 didn't support configuration more than 4 trx..
you have to combine BTS with the same type to support high capacity and also add 1 antenna/sector if needed.
for example... BTS312 + BTS312 so it will support S44 + S44 = S88 in 1 site..