How many Node B can configured in 1 GPB65 card?

[prem19809]

Hi friends,

Please can you advice, How many Node Bs can be configured in 1 GPB65 card in RNC 3820 IP based network?

Rgds,
prem

[fon909]

one can configure about 192 cells in 1 GPB65 card. However, if traffic is high you will observe poor accessibility due to MP load rejections.

[prem19809]

Thank you for your replay.

I have a problem in our network i,e some utrancells are down without generating any alarm in Node B and RNC end. What could be the problem and solution please
(Utrancells are down like one site 2 sectors and other site 1 sector. Not a full site down)

[electron]

Thank you for your replay.

I have a problem in our network i,e some utrancells are down without generating any alarm in Node B and RNC end. What could be the problem and solution please
(Utrancells are down like one site 2 sectors and other site 1 sector. Not a full site down)

Try to upgrade RBS SW to the highest version

[prem19809]

Site is working with latest software CXP9017021%1_R8E02.
Site is working before with same software.

[electron]

Site is working with latest software CXP9017021%1_R8E02.
Site is working before with same software.

What about RNC SW version? actually SW clash always will not make problem i have the experience that is will start suddenly without any reason !

[prem19809]

CXP9014711/4_R1NB CXP9014711/4_R1NB 0 367 111111 IDLE, INSTALL_COMPLETED W11B (EP38-CPP_8.0.1.1) RncMOM_BY
CXP9014711%2_R5N CXP9014711/2_R5N 13 374 110914 120307 IDLE, UPGRADE_COMPLETED W10B (EP61-CPP_8.0.0.3) RncMOM_BJ2
CXP9014711/4_R2EA CXP9014711/4_R2EA 13 367 120206 120508 IDLE, UPGRADE_COMPLETED W11B (EP48-CPP_8.0.1.1) RncMOM_BY