Thanks Thanks:  3
Showing results 1 to 3 of 3

Thread: Conect PC and mtm800 and use the PC for voice

  1. #1
    Junior Member Reputation: 10
    Join Date
    2012-04-25
    Posts
    1


    Default Conect PC and mtm800 and use the PC for voice

    Hi, everyone.
    I know that it is possible control the MTM800 with the PC but I want connect the PC with MTM800 and I want pass the voice before for the computer and after to MTM800.
    Thank's.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 33
    Join Date
    2010-02-17
    Posts
    29


    Default Re: Conect PC and mtm800 and use the PC for voice

    what about using the PC audio card and radio rear connector?
    PC-audio-out to radio-mic-in
    radio-spk-out to PC-audio-in
    use PC-RS232 DTR/RTS pins to pilot a relay for PTT

  4. #3
    Junior Member Reputation: 10
    Join Date
    2012-02-20
    Location
    Queensland.Au.
    Posts
    3


    Default Re: Conect PC and mtm800 and use the PC for voice

    Hi there,
    I have been trialling TeTRA over IP in the past few months with ********/Sepura radio kit,with all radio's running class 1 clear firmware with great success.We have a small closed group of like minded licensed radio enthusiasts who wanted to progress and develop digital radio technology over IP ,primarily the TeTRA protocol.
    We all used the Tigertronics Signalink USB sound card as the mobile radio interface linked to the PC,which comes with a 'customised' cable to suit whatever radio you choose to operate via the dedicated 'accessory' port on the rear of most mobile radios i.e.mtm series ect.
    Regards.
    Jen

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •