-
BannedUser-MultiAccounts
Reputation: 89
1 out of 1 members found this post helpful.
silent call in 2G
dears,can any one here know how we can detect silent calls from TEMS log file ?
-
2012-04-09 05:24 PM
# ADS
Circuit advertisement
-
Member
Reputation: 22
1 out of 1 members found this post helpful.
Re: silent call in 2G
from one of my experience, you should check when the ms is in connected mode but no rx qual nor sqi plotted
-
Member
Reputation: 260
1 out of 1 members found this post helpful.
Re: silent call in 2G
Originally Posted by
eng.akhalifa
dears,can any one here know how we can detect silent calls from TEMS log file ?
As per my experience, SQI and C/I is not reported for silent/mute call
-
BannedUser-MultiAccounts
Reputation: 89
1 out of 1 members found this post helpful.
Re: silent call in 2G
Originally Posted by
ventinel
As per my experience, SQI and C/I is not reported for silent/mute call
can i find any messages in layer 2 or layer 3 messages can indicate to silent call ?
-
Member
Reputation: 260
1 out of 1 members found this post helpful.
Re: silent call in 2G
Originally Posted by
eng.akhalifa
can i find any messages in layer 2 or layer 3 messages can indicate to silent call ?
i guess there is no specific message to indicate mute/silent call
-
Member
Reputation: 109
Re: silent call in 2G
it can be traced in core,
by the way,there are some reasons for it:
tranmission
sw version of your BTS,RBS,..
recentrly activated features such as TFO/TrFO
-
Junior Member
Reputation: 10
Re: silent call in 2G
During silent call,
TEMS show the values of SQI fixed at 7 and DTX at 96..
Bookmarks