Thanks Thanks:  0
Showing results 1 to 3 of 3

Thread: Low Level for DCS1800

  1. #1
    Member Reputation: 127
    Join Date
    2010-11-19
    Posts
    224


    Default Low Level for DCS1800

    Dear Support;

    I have problem, one sector installed above building with 1800 band configration 1*4, in the Ideal mode the level is good, while in dedecated mode inside the building the level is -90, please note the building consist two floors and the antenna installed on Mast 6 meter above the building.

    I increased the TX power nothing is changed, how can i increase the level to be -60 inside the building,

    The M-tilt is 4 and the electrical is 2, antenna height from ground is 10 meter., the power was set as shown in below.

    Cell BSPWR BSTXPWR
    ASADQ1 35 35


    Regards

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 127
    Join Date
    2010-11-19
    Posts
    224


    Default Re: Low Level for DCS1800

    Please support me.

    Regards

  4. #3
    Member Reputation: 96
    Join Date
    2012-03-02
    Posts
    87


    Default Re: Low Level for DCS1800

    Dear

    also i face same problem with Huawei vendor
    the problem was from power control adjustment parameters

    to check is the same problem with u , pls disable the activation of power control

    thanks

    Sad_RNP

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •