DTM Feature in E******* system

[shahram]

Hi,
We have recently activated DTM (Dual Transfer Mode) in our BSCs,but the total transfered data in DTM mode is very very low,
We have activated the feature in BSC and cell level,do you think we need to do any change in HLR MSC or MGW ,Is this bahaviour normal ? (total Transfered data volume in DTM mode is 10 MByte in BSC Peak hour for a BSC with 400 Cells)

Thanks

[auto_art]

Hi,
We have recently activated DTM (Dual Transfer Mode) in our BSCs,but the total transfered data in DTM mode is very very low,
We have activated the feature in BSC and cell level,do you think we need to do any change in HLR MSC or MGW ,Is this bahaviour normal ? (total Transfered data volume in DTM mode is 10 MByte in BSC Peak hour for a BSC with 400 Cells)

Thanks

this is normal because very few terminal supports class C operation(voice+data). also u may tested during DTM mode very few bytes are exchanged.

[electron]

this is normal because very few terminal supports class C operation(voice+data). also u may tested during DTM mode very few bytes are exchanged.

I think you mean Class A not Class C.

Thanks

[auto_art]

may be i frgt..i wnted to say which suports both cs ps along.