Thanks Thanks:  1
Showing results 1 to 2 of 2

Thread: Code congestion

  1. #1
    Junior Member Reputation: 6
    Join Date
    2010-05-10
    Posts
    26


    Default Code congestion

    Hello experts,

    I need your advices again about the code cogestion

    Can someone explain this concept very clear because i don't understand it very well
    What causes this congestion ?
    Which codes were are talking about the R99 or HSDPA ?
    Because we configure 45 codes per site for HSDPA ? the congestion is in these codes ???

    Please i need your help to understand this issue.

    Thanks in advance.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 172
    Join Date
    2010-11-01
    Posts
    515


    Default Re: Code congestion

    In DL you use codes with different spreading factors that are limited by UMTS carrier.When you have congestion this simply means that when you have a new service or during mobility admission control by DL codes can not pass for example due to big traffic demand and usualy the service is rejected (i dont take into account different load control algorithms and etc). So in your case you have lack of non-HSDPA codes. The definition for 45 codes that you mentioned is a license function per NodeB regarding these HSDPA codes in DL but this is not the case here. In order to start investigation of the problem you may follow next few steps.

    1) check your traffic distribution. If it is high can you do something to offload the cell - change of HO/reselection parameters, introduce load control algorithms etc.
    2) check whether you have proper configuration of reserved HSDPA codes. If they are too much this can cause congestion. You may try reduce them.
    3) In last case you may introduce second UMTS carrier if available.

    In my personal feeling i think you reserved too much HSDPA codes that is happening mostly.

    I believe other colleagues will give you additional hints as well but is good to search the forum since there was lot of topics regarding congestions issue.

    Good luck

    BR
    Alex


    Quote Originally Posted by khaledkhoudi View Post
    Hello experts,

    I need your advices again about the code cogestion

    Can someone explain this concept very clear because i don't understand it very well
    What causes this congestion ?
    Which codes were are talking about the R99 or HSDPA ?
    Because we configure 45 codes per site for HSDPA ? the congestion is in these codes ???

    Please i need your help to understand this issue.

    Thanks in advance.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •