Difference Ec/No between Idle, and Voice CS12.2K

[lamhd_bk]

Dear all
I have one concern about Nemo,
I have just finished DT with Nemo Outdor and I dont know what is problem?
The Ec/No of MS in voice mode is better than Ec/No in Idle mode. ( The same MS)

I give you logfile and consider for me and give me advise

Thank so much

[cdmahn]

What is the channel for you to get Ec/No in 3G?

[kamy]

What is the channel for you to get Ec/No in 3G?

????? strange question actually

[cdmahn]

What is the channel for you to get Ec/No in 3G?

I mean what is the Ec/No parameter that the author get in Actix/Nemo.

If he uses Actix, I guess he use Uu_ActiveSet_EcNo_0 for Ec/No, and the answer is quite easy. In voice mode, due to SHO, Uu_ActiveSet_EcNo_0 is the best Ec/No of cells in Active Set. In Idle Mode, it is just simple the Ec/No of active cell itself. So, Uu_ActiveSet_EcNo_0 in Voice mode should be better than it in Idle mode.

[lamhd_bk]

Dear
Do You assume that another effect to MS in Idle mode?
But the both of MS which were together,and i already exchanged to check.

RG

[moh_sulaiman]

it is because of Power control Algos

[newyzy]

because handover gain.

[lamhd_bk]

All
It's not clearly,
we have the signal power=P

the chip rate=W

the user bit rate=R

the noise=PN

the interference= I (interference between users)

Ec=P/W
Io=I/W
N0=(I+PN)/W
---> Ec/No = P/ ( I + PN)

[umts99]

UE will add own interference in dedicated mode.SO its different.
Any body have different answer than please reply.

How to Resolve RTWP?
FInd here complete answer on RSCP and RSSI

[cococrunch]

For you to compare Ec/No in 2 scenario, everything should be equal so its apple to apple. I assume this is in different time since you use same MS for idle and voice.

1. Same time?
2. Same cell load?
3. Same direction of drive test?
4. Same best server?