I have a problem on the 2G to 3G cell reselection on the country border areas. I have tried to compare all the parameters for reselection to other cells and other BSC but I found no inconsistency. The problem is intemittent in nature as we can get cell reselection sometimes. So I guess the cell parameters are ok. When I checked on TEMS DT, I found that there are so many attempts to reselect but none of them is not going all the way through to 3G.
What seems to be the problem, and how can I solve the issue.
Re: E/// 2G to 3G Cell reselection Problem on border
Have you analyzed scanner and coverage in the area? Since it is country border, you might be suffering from the network from the neighboring country. These fluctuations look like there is a problem with the coverage from the other country that is leaking into your area. If this is the case, est solution is to write to the national regulator to complain to the neighboring national agency since such cases are solved by CEPT recommendations.
Cheers
Re: E/// 2G to 3G Cell reselection Problem on border
you can check also in 2G cell..
BSC PROPERTY COEXUMTS: 1
QSC: 15
QSCI: 0
QSI: 7
FDDMRR: 0
FDDQMIN: 7
FDDQOFF: 0
SPRIO: NO
FDDQMINOFF: 0
FDDRSCPMIN: 4
ISHOLEV: 0
Diversity: NODIV
MRSL: 49
SC: To be defined only in IDLE BA List
BR//
WNS..
__________________
Cheers,. wnsworld
____________________________________ ..either you work smart or work more....
Please try my default passkey wnsjay before asking
Re: E/// 2G to 3G Cell reselection Problem on border
Originally Posted by wnsworld
you can check also in 2G cell..
BSC PROPERTY COEXUMTS: 1
QSC: 15
QSCI: 0
QSI: 7
FDDMRR: 0
FDDQMIN: 7
FDDQOFF: 0
SPRIO: NO
FDDQMINOFF: 0
FDDRSCPMIN: 4
ISHOLEV: 0
Diversity: NODIV
MRSL: 49
SC: To be defined only in IDLE BA List
BR//
WNS..
Hi WNS,
I have checked all of this parameter, the only difference is I set SPRIO=YES, FDDQMIN=5, FDDRSCPMIN=6. And all BA UMFI are defined correctly in IDLE. When I tried to check the TEMS logfiles, there is a cell reselection procedure(a lot of times) but it is not going through 3G successfully. What do you think should I check next.
I have attached the screenshot for this.
Re: E/// 2G to 3G Cell reselection Problem on border
Originally Posted by icebreaker05
Hi WNS,
I have checked all of this parameter, the only difference is I set SPRIO=YES, FDDQMIN=5, FDDRSCPMIN=6. And all BA UMFI are defined correctly in IDLE. When I tried to check the TEMS logfiles, there is a cell reselection procedure(a lot of times) but it is not going through 3G successfully. What do you think should I check next.
I have attached the screenshot for this.
Bookmarks