PCHR in RAN12

[ManuelBelgrano]

Hi,

Does any of you experts on Huawei knows how and where to configure PCHRs collection in RAN12. It appears some of the MML Commands from R11 are not available in RAN12.

Thanks for your help.

regards,

[Kamil Koc]

Hi,

In our network the pchr logs are saved in

ftp://XXX.XXX.XXX.XXX/bam/common/fam/famlogfmt/pchr/

XXX.XXX.XXX.XXX is ip adress of the RNC.

[keanchan]

Hi,

Does any of you experts on Huawei knows how and where to configure PCHRs collection in RAN12. It appears some of the MML Commands from R11 are not available in RAN12.

Thanks for your help.

regards,

Do you mean the "SET UCHRCTRL..." command no longer work for RAN 12?

For full command, please go to here http://getsatisfaction.com/aexio/top..._into_xeus_pro

[ManuelBelgrano]

Do you mean the "SET UCHRCTRL..." command no longer work for RAN 12?

For full command, please go to here http://getsatisfaction.com/aexio/top..._into_xeus_pro

Hi Kean,

Thanks for your message, however those commands you mentioned in your wbesite are not available in LMT, look at pictures below:
LMT1.jpgLMT2.jpg

[keanchan]

Hi Kean,

Thanks for your message, however those commands you mentioned in your wbesite are not available in LMT, look at pictures below:
LMT1.jpgLMT2.jpg

Hi Manuel,
In the your snapshot you are showing LST commands instead of SET command. Can you find the Set command there?

[agenov]

This is hidden command implementation. Check in your inner CFGMML file.

Hi Kean,

Thanks for your message, however those commands you mentioned in your wbesite are not available in LMT, look at pictures below:
LMT1.jpgLMT2.jpg

[ManuelBelgrano]

Hi agenov,
thanks for your answer, I cannot find the command in CFGMML file. Do you know Anyway to unhidde this command?

[agenov]

No way or at least by end-user. type EXP INNERCFGMML, log in the RNC and open the file. By default all sub-parameters of UCHRCTRL are open.

BR
Alex

Hi agenov,
thanks for your answer, I cannot find the command in CFGMML file. Do you know Anyway to unhidde this command?