-
Junior Member
Reputation: 10
E******* OMT in WINDOWS 7
HI guys
I install OMT R43 in windows 7, when I try to connect to the RBS it gives me an error
" Overlapped I/O operation is in progress"
Please help me !!!!!!!!!!
-
2011-12-22 01:19 AM
# ADS
Circuit advertisement
-
Member
Reputation: 222
Re: E******* OMT in WINDOWS 7
Never try OMT R43 in windows seven.. what about the latest OMT P44? have you try!!
Best regard
-
Junior Member
Reputation: 10
Re: E******* OMT in WINDOWS 7
I tryed P44 and P45 but the same Erorr is shown
any othe ideas???????????
help me please !!!!!!!!!!!!!!!!!!!!!!!!
-
Member
Reputation: 50
Re: E******* OMT in WINDOWS 7
Hi.
Follow this steps:
1. Use a VMware Virtual Machine with Windows XP SP2 x86 installed on it.I suppose you're using a relatively new laptop which have enough power to run that.
2. Configure an USB-TO-RS232 adapter as COM1/2 using the adaptor's vendor original drivers.I use a Belkin adapter. If this is your case use the Prolific drivers. Install them from whithin your host and guest machines.
3. Install OMT in the VM and connect to the RBS.
Best regards.
-
Member
Reputation: 222
Re: E******* OMT in WINDOWS 7
what about if run the program as administrator?
i mean when you install the program first time instal with the administrator rights.
hope it use
Regard
-
Junior Member
Reputation: 10
Re: E******* OMT in WINDOWS 7
Originally Posted by
Abuelooorl
Hi.
Follow this steps:
1. Use a VMware Virtual Machine with Windows XP SP2
x86 installed on it.
I suppose you're using a relatively new laptop which have enough power to run that.
2. Configure an USB-TO-RS232 adapter as COM1/2 using the adaptor's vendor original drivers.
I use a Belkin adapter. If this is your case use the Prolific drivers. Install them from whithin your host and guest machines.
3. Install OMT in the VM and connect to the RBS.
Best regards.
Than you for your replay
I install XP mode with VMlite then I install OMT in it, it works fine with RBS 2206,2207,2216 and 2216 V2, BUT it dosen't work with the new RBS 6000
I hope there is a solution to make it work in Windows 7
-
Junior Member
Reputation: 10
Re: E******* OMT in WINDOWS 7
Originally Posted by
abhye_x
what about if run the program as administrator?
i mean when you install the program first time instal with the administrator rights.
hope it use
Regard
Thank you
I will try it tomorrow, I hope it will work
-
Junior Member
Reputation: 10
Re: E******* OMT in WINDOWS 7
Any ideas ?????????????!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
Junior Member
Reputation: 13
Re: E******* OMT in WINDOWS 7
Hello,
Do you have E*******'s RPM 919 732 cable or did you make the connection cable yourself?
Also there has been reports that certain usb-rs232 adapters and pcmcia cards don't fully comply with the rs232
standard as the pin voltage is not correct. this affects only connections with DUG, not DUL nor DUW.
regards,
chammy
-
Junior Member
Reputation: 10
Re: E******* OMT in WINDOWS 7
Originally Posted by
chammy
Hello,
Do you have E*******'s RPM 919 732 cable or did you make the connection cable yourself?
Also there has been reports that certain usb-rs232 adapters and pcmcia cards don't fully comply with the rs232
standard as the pin voltage is not correct. this affects only connections with DUG, not DUL nor DUW.
regards,
chammy
I made the connection by my self, yes you are right in XP mode the connection effects only the connection with DUG, BUT in windows 7 it gives me the same error.
what if I get the E*******'s RPM 919 732 cable is it will work with windows7 or only in XP mode?????
help me please!!!!!!!!!!!!!!!!!!!!
Bookmarks