How does get VSWR of RBS3206 from MO Shell?

[Interface]

Dear all Exps,
Today, our Network used 3 types of NodeB; RBS 3418, RBS3206 and RBS 6000.
Which RBS 3418, I can get VSWR by command: lh ru fui get vswr.
Which RBS 3206, I can't do that. The error is as below:
3HN851> lh ru fui get vswr

111212-14:40:40 10.98.9.57 8.0d RBS_NODE_MODEL_M_1_8 stopfile=/tmp/16897
================================
$ lhsh 001200/port_0_dev_5 fui get vswr
0012p0d5: error. Type 'te log read' for more info
================================
$ lhsh 001200/port_4_dev_7 fui get vswr
0012p4d7: error. Type 'te log read' for more info
================================
$ lhsh 001200/port_8_dev_8 fui get vswr
0012p8d8: error. Type 'te log read' for more info

So that, why and how to fix this problem? Same question for RBS6000.
Thanks so much!

[Interface]

Addition, with RBS3206, we don't use any ASC or TMA, ...> Is it the reason that i can't collect the vswr of these sites?

[Interface]

Who can help us?

[kaizzer545]

Tell me what happen if you type "te log read" and what about current alarms? could you let me know background

[tsiz]

did you try

Lhsh 001200/port_4_dev_8 fui get vswr

[esoestemp]

Hi,
Below are some results from VSWR checking.
Can anybody tell me which is the "norrmal" range of VSWR?

>>> Type "bp" to view available board-groups and "bp <group>" to view group contents.
=============================================================================================
$ lhsh 000100/port_0_dev_5 fui get vswr
0001p0d5: vswr: 19.4[dB]
=============================================================================================
$ lhsh 000100/port_1_dev_6 fui get vswr
0001p1d6: vswr: 19.6[dB]
=============================================================================================
$ lhsh 000100/port_2_dev_7 fui get vswr
0001p2d7: vswr: 25.4[dB]
$

[Interface]

Hi all,
To esoestemp: These value are the RL, you can caculute the VSWR through the formular: VSWR = (1+10^(-RL/20))/(1-10^(-RL/20)).The range of VSWR: Less than 1.3 is normal.
To tsiz: I tried but the result was same. In our network we don't have ASC in Antenna of RBS3206 so that I afraid that we can't get this value of this class.

[jamal]

Hi Mate,

That's correct. Without TMA/ASC you can't read the VSWR values.
You may check the block diagram in ALEX.

CMIIW,
BR//JM

[Interface]

Hi Jamal and all,
Do you understand the method of DC resistance supervision?