Thanks Thanks:  15
Page 1 of 2 12 LastLast
Showing results 1 to 10 of 13

Thread: X-Cal 3.2.8.16

  1. #1
    Member Reputation: 27
    Join Date
    2010-04-10
    Posts
    40


    Default X-Cal 3.2.8.16

    X-Cal 3.2.8.16 + ********

    xcal3.2.8.16.rar


    Supports the following Features:
    Technology : Wibro

    Application : Inbuilding, SIP, Alarm Event, User Defined, Work Sheet, RTP, VOD(MPEG4), WiBro AIS, TTA, Xchanger, Shinkansen, RemoteControl, Multi Session, Voice, FTP, TFTP, PPP, PING, HTTP, E-Mail, VOD(MPEG4), UDP TEST, Mobile Test, VoIP(Skype), SKT_IMS

    Chipset : WiMax-Samsung(SDM), WiMax-Runcom, WiMax-GCT, WiMax-Samsung(BDM), WiMax-ZyXEL(Runcom), WiMax-********(Longhorn), WiMax-Intel, WiMax-LGE, WiMax-TELSIMA(Sequance), WiMax-Beceem(CPE), WiMax-TI, WiMax-Intel Rosedale2, WiMax-Sequans
    Last edited by robin1044; 2011-12-11 at 05:12 PM

  2. Thanks ali56s, hp3hp3 thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Senior Member Reputation: 302
    Join Date
    2010-07-21
    Location
    on the Pacific Rim of Southeast Asia
    Posts
    412


    Default Re: X-Cal 3.2.8.16

    Quote Originally Posted by robin1044 View Post
    X-Cal 3.2.8.16 + ******** xcal3.2.8.16.rar

    what is your default password sir?the attached is only a screenshot
    Last edited by ninoy_122184; 2011-12-12 at 09:04 AM
    password is onepiece

    hit THANKS and REP is highly appreciated..cheers!!

  5. Thanks Roman99 thanked for this post
  6. #3
    Member Reputation: 27
    Join Date
    2010-04-10
    Posts
    40


    Default Re: X-Cal 3.2.8.16

    this file has no password !
    Last edited by robin1044; 2011-12-11 at 04:08 PM

  7. Thanks hp3hp3 thanked for this post
  8. #4
    VIP Member Reputation: 2339 ali56s's Avatar
    Join Date
    2008-07-07
    Location
    Near God
    Posts
    1,112


    Default Re: X-Cal 3.2.8.16

    Quote Originally Posted by robin1044 View Post
    X-Cal 3.2.8.16 + ********

    xcal3.2.8.16.rar


    Supports the following Features:
    Technology : Wibro

    Application : Inbuilding, SIP, Alarm Event, User Defined, Work Sheet, RTP, VOD(MPEG4), WiBro AIS, TTA, Xchanger, Shinkansen, RemoteControl, Multi Session, Voice, FTP, TFTP, PPP, PING, HTTP, E-Mail, VOD(MPEG4), UDP TEST, Mobile Test, VoIP(Skype), SKT_IMS

    Chipset : WiMax-Samsung(SDM), WiMax-Runcom, WiMax-GCT, WiMax-Samsung(BDM), WiMax-ZyXEL(Runcom), WiMax-********(Longhorn), WiMax-Intel, WiMax-LGE, WiMax-TELSIMA(Sequance), WiMax-Beceem(CPE), WiMax-TI, WiMax-Intel Rosedale2, WiMax-Sequans
    your attach file is only image
    BR
    Sure We Can

  9. Thanks ninoy_122184 thanked for this post
  10. #5
    Member Reputation: 27
    Join Date
    2010-04-10
    Posts
    40


    Default Re: X-Cal 3.2.8.16

    Just Image,... Like many other links in this forum.

    Maybe I would share someday

  11. Thanks hp3hp3 thanked for this post
  12. #6
    VIP Member Reputation: 5114
    Join Date
    2009-10-01
    Posts
    2,422


    Default Re: X-Cal 3.2.8.16

    Quote Originally Posted by robin1044 View Post
    Just Image,... Like many other links in this forum.

    Maybe I would share someday
    I think this is unacceptable.

  13. Thanks ninoy_122184 thanked for this post
  14. #7
    Member Reputation: 27
    Join Date
    2010-04-10
    Posts
    40


    Default Re: X-Cal 3.2.8.16

    I think so, but this is the policy of site...

    Some ppl. work and share and the other take benefit.

    Damn cruel policy !!!
    Last edited by robin1044; 2011-12-13 at 01:36 PM

  15. #8
    VIP Member Reputation: 5114
    Join Date
    2009-10-01
    Posts
    2,422


    Default Re: X-Cal 3.2.8.16

    Quote Originally Posted by robin1044 View Post
    I think so, but this is the policy of site...

    Some ppl. work and share and the other take benefit.

    Damn cruel policy !!!
    What are you talking about?
    Which rule says to share screenshots instead of real stuff?
    http://www.finetopix.com/showthread....l=1#post132849

  16. Thanks ninoy_122184, pioneerelex thanked for this post
  17. #9
    Member Reputation: 27
    Join Date
    2010-04-10
    Posts
    40


    Default Re: X-Cal 3.2.8.16

    I have been about 20 months member of this forum.
    Most of the time I have been Junior Member and have had no chance even to share knowledge and reply other posts. (Rule: When you are 'Junior member' you can not reply other posts, you can just start a new post !!!)
    it seems this forum does not need 'Junior Members' opinions or knowledge,
    This post was dropped here when I was 'Junior Member' so it has nothing special for forum members.

    Note: The rule apparently says: hey 'Junior member', we don't need your opinion, we don't need your knowledge.

    I will make more meaningful posts in future, (Provided that I am not downgraded again !! - or maybe banned )
    Last edited by robin1044; 2011-12-13 at 12:21 PM

  18. Thanks ninoy_122184, pioneerelex thanked for this post
  19. #10
    Senior Member Reputation: 302
    Join Date
    2010-07-21
    Location
    on the Pacific Rim of Southeast Asia
    Posts
    412


    Default Re: X-Cal 3.2.8.16

    Quote Originally Posted by robin1044 View Post
    I have been about 20 months member of this forum.
    Most of the time I have been Junior Member and have had no chance even to share knowledge and reply other posts. (Rule: When you are 'Junior member' you can not reply other posts, you can just start a new post !!!)
    it seems this forum does not need 'Junior Members' opinions or knowledge,
    This post was dropped here when I was 'Junior Member' so it has nothing special for forum members.

    Note: The rule apparently says: hey 'Junior member', we don't need your opinion, we don't need your knowledge.

    I will make more meaningful posts in future, (Provided that I am not downgraded again !! - or maybe banned )
    my suggestion is you post your opinions(reply) to other members who have a problem base on their post,if it heps they will surely give
    thanks ans reputation to you..post many documents also..
    password is onepiece

    hit THANKS and REP is highly appreciated..cheers!!

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •