Thanks Thanks:  1
Showing results 1 to 3 of 3

Thread: How to send/receive SDS via AT commands (PEI) on ******** MTM800 or similar

  1. #1
    Member Reputation: 33
    Join Date
    2010-02-17
    Posts
    29


    Default How to send/receive SDS via AT commands (PEI) on ******** MTM800 or similar

    Hi,
    i'd like to send & receive SDS via the PEI interface (PC -> RS232 -> MTM800).
    an example of sequence of at commands is highly appreciated or a link to a manual i can read by myself.

    Bye!
    uy

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    BannedUser Reputation: 245
    Join Date
    2010-10-04
    Posts
    277


    Default Re: How to send/receive SDS via AT commands (PEI) on ******** MTM800 or similar

    These things are in ******** Development programm, you will have to apply for it with ******** in order to get it.

    regards

  4. Thanks uy0101 thanked for this post
  5. #3
    Member Reputation: 33
    Join Date
    2010-02-17
    Posts
    29


    Default Re: How to send/receive SDS via AT commands (PEI) on ******** MTM800 or similar

    For those who might be interested i've found the entire sequence of AT commands (and related encoding/decoding) in order to send/receive SDS at the following link:

    http://read.pudn.com/downloads119/so...main.pas__.htm

    It's written in delphi but it's well commented.
    ....and without any need to apply to Moto Dev Program...

    Thanks anyway for your hint.
    uy

Tags for this Thread

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •