-
Member
Reputation: 53
Calculate utilization efficiency of Node B
Dear Bro,
Please give me an idea how to calculate utilization efficiency of Node B ? ( based on channel elements or code channels or power .....)
Thanks.
-
2014-01-04 11:49 AM
# ADS
Circuit advertisement
-
Re: Calculate utilization efficiency of Node B
as u mentioned Node B utilization can be evaluated based on all type of resources separately.
Cheers
Originally Posted by
mypp
Dear Bro,
Please give me an idea how to calculate utilization efficiency of Node B ? ( based on channel elements or code channels or power .....)
Thanks.
-
Member
Reputation: 53
Re: Calculate utilization efficiency of Node B
Originally Posted by
electron
as u mentioned Node B utilization can be evaluated based on all type of resources separately.
Cheers
To calculate utilization efficiency of Node B, what resource should be based on and how ?
-
Senior Member
Reputation: 722
Re: Calculate utilization efficiency of Node B
Hi.
Usually there are counters that show the utilization of the different resources in the node and also you know (and the system) the maximum allowed. So, it is easy to calculate what is the utilization.
e.g. Channel elements: number of CE used in Busy Hour (UL and DL)
I hope it helps
-
Member
Reputation: 82
Re: Calculate utilization efficiency of Node B
IMHO, averaging all resources's utilization is best practice ( IUB, CE, Power, Code )
-
VIP Member
Reputation: 1795
Re: Calculate utilization efficiency of Node B
u need to check all separate..e.g. code, power, CE.
Auto_art Default PAS: london
pl rate threads for their usefulnes
share & care
-
Re: Calculate utilization efficiency of Node B
separated resources: DL power, CE, code, Iub. should take at busy hour
-
Users Awaiting Email Confirmation
Reputation: 14
Re: Calculate utilization efficiency of Node B
It depends about what you consider to be efficiency, and what you consider to be a Node.
Suppose we measure the efficiency as the aggregated efficiency of the carriers in the Node.
And suppose also that we measure efficiency as the amount of traffic carried during a period of time against a basic ressource utilization.
Think about a HSDPA carrier.
For the downlink, let's say we consider efficiency as the amount of data volume in MB that the node has carried on the busy hour against the ocupation of TTI in the same hour. This ratio is clear and allow to compare Nodes. Occupation of TTI's is a basic counter as it is data volume. if we agree that all Nodes B have the same number of codes, power, CE's, as it is the normal way, this is quiet useful.
For the uplink, efficiency is more complicated. Think about a HSUPA node. Noise, and noise floor intervene. TTI here has not the same meaning (not to say TTI scheme is more complicated with 2 ms and 10 ms TTI). Besides, power and codes depends on the UE's around. Moreover, soft handover adds complexity and is imposible to measure 'efficiency' (whatever you mean by this word) in an isolated way, you need to take into account the mean active set. My best advice is to measure data carried on during busy hour against Rise Over Termal on the carrier along the same busy hour.
Regards
-
Member
Reputation: 158
Re: Calculate utilization efficiency of Node B
If you use Huawei equipment, you can refer to monitor Tab in the LMT
Bookmarks