Flexlm 11.4

[VikingPirate]

Hi guys, I am very close to my goal of creating a working floating license for Flexlm 11.4 which I need for the newest release of SDL Trados Studio 2011, a very expensive piece of software used for Translation. I was previously working with SDL Trados 2009, which I had no difficulty with because of the many resources available for download all over the net for the older Flexlm 8 which SDL was previously using. I think I will get their very soon, but I am really hoping for: lmkg30a_source.rar‎, but read something about a member here named Lin who has a version of it?? I'm found it difficult to get in with the guys at EXETOOLS since registration without an invitation is closed. The whole forum seems to be filled with people just begging for invites, and I won't do that.

I have some experience with this, but I'm definitely still a noob with a lot to learn! However, what I have accomplished so far is completely from personal trial and error. Anybody who has any ideas for me? I'm having trouble getting working vendor keygens to use with my already running server which hosts my other products running Flexlm 8. Any help would be greatly appreciated, and I will be in your debt. I plan to be here for a long time to come!! I love this stuff, just wish I had more time. If I can't get this done very soon, i will just have to go back to SDL Trados 2009 which is nicely *****ed already - not as good, but at least it works... getting tired of "Trial-Resetting" my 2011 beta version, and have a huge translation project due in less than a week!

[zementmischer]

... I am really hoping for: lmkg30a_source.rar

This keygen is only useful if you *know* the encryption seeds and want to compile lmcrypt.exe yourself!
And just in case you didn't know: you can only recover encryption seeds if the target still uses old-style, 'non-ECC' licenses.
You may also use LONG's FLEXlm Vendor Key Generator (from cr*ckz/woodmann) instead which will generate the same set of vendor keys as lmkg30a does (lmkg30a is based on the disassembly of LONG's version).
IMHO the single useful thing about lmkg30a is its source code...

*UPDATE*
You can also get my lmkg30a and its source code at http://www.finetopix.com/154274-post22.html

[catelo]

... getting tired of "Trial-Resetting" my 2011 beta version...

Hi,

I was wondering if you could offer any guidance on your resetting approach. I have tried different options, but no success. I got stuck in the middle of a project and the translation memory is not backward compatible.

Thanks!

[AlexSSS]

Please correct link:

Not Found
The requested URL /154274-post22.html was not found on this server.

*UPDATE*
You can also get my lmkg30a and its source code at http://www.finetopix.com/154274-post22.html

[mybstyle17]

HI for all
Anybody can help me ?
How I can extract the seeds and generate the license for this ?
http://www.mediafire.com/?i250wv2w5omdxre
and the patched
http://www.mediafire.com/?luv532hqa795x1p
Thanks

[mybstyle17]

Anybody can help me ?

[Lashboys]

Check attached tutorial for FLEXlm 7.x-11.4 seed extraction.
FLEXlm Vendor Keygen 3.0a with source is also attached.
And if you need SDK there you can DL 11.4 SDK there you can DL

[mybstyle17]

Check attached tutorial for FLEXlm 7.x-11.4 seed extraction.
FLEXlm Vendor Keygen 3.0a with source is also attached.
And if you need SDK there you can DL 11.4 SDK there you can DL

Thank you,but I have all this ... I need only know how I can use ..
I try it much time ,but I not have experience in Ollydbg.exe... and I not understand this steps

" • Delete the 16 random bytes inside the job structure, (starting @ job+04 and ending @ job+13), andreplace with “00”
• Run the program & let it break at BP#2 (“Break on RET” after returning from the call to _l_n36_buff)
• Now Look at the following stack locations: (follow in dump)
o ESP+04: Pointer to vendor name (name of vendor daemon)
o ESP+08: Pointer to vendor code (which now will contain the clean seed 1 and 2)
o VC+04 = Seed1
o VC+08 = Seed2 "

Thanks again and Best Regards,Mybstyle !!!

[Lashboys]

After BP stop at 0040CB41 just look at ECX and follow in dump and fill 16 rand with 00



And F9 to stop at BP2 look at ESP and follow in stack:
ESP+08: Pointer to vendor code (which now will contain the clean seed 1 and 2)
VC+04 = Seed1
VC+08 = Seed2
Follow in Dump

[mybstyle17]

Thank you very much for your effort