Originally Posted by
mirtunjay_1975
Please find output command
1) You have to identify the active CM unit
ZUSI:CM,;
2) You have to find the currenly used timer value in BSU related UTPFIL (5AC0018 is the BSU-UTPFIL file number)
ZDFD:CM,x:5AC0018,;
You should look for 32 01 3D 00 B8 0B 00 00 in case of T305 currently set to 30 seconds and 32 01 3C 00 B8 0B 00 00 for T308 also set to 30 seconds.
/ AIFPRB's identifier is 132 --> 32 01
T305 is identified as 3D --> 3D 00
T308 is coded as 3C --> 3C 00
30 seconds equals 3000 100th/sec --> h'BB8 --> B8 0B 00 00 /
3) Once you find the above presented values, you have to change them to
32 01 3D 00 90 01 00 00 for T305, this sets it to 4 seconds,
32 01 3C 00 C8 00 00 00 for T308, this changes it to 2 seconds,
by the command;
ZDFS:CM,x:5AC0018,y,::
where y represents the record number to be patched
Note: If the record
i) 32 01 3D 00 B8 0B 00 00 forT305
ii) 32 01 3C 00 B8 0B 00 00 for T308
can’t be found, please find the next free records and patch 32 01 3D 00 90 01 00 00 for T305 (4s), and 32 01 3C 00 C8 00 00 00 for T308 (2s).
Bookmarks