Hello everyone,
Please don't update in this attachment. If you update GDFS from other K800, your phone will be died.
Hello everyone,
Please don't update in this attachment. If you update GDFS from other K800, your phone will be died.
1.Use Far manager...fishing with other firmware to make restoration...then flashing firmware tems & write script...free tools
2. use setool box use starting software v1.0 reset develper mode this we must have setool box
only can do with this way
(default password = "topixfine")
I did it an hour ago..
the only thing which I missed in all posts before is that you must press "C" for flashing filesistem + software and buttons "2+5" for flashing GDFS and activation script..
next thing is that for flashing filesistem + software I had to check "bypass DB2020 security"
for flashing GDFS and script it should be unchecked..
for now everything works ..even position with Bluetooth GPS
must buy M2 card today to start recording logs...
the only problem I have right now is connection with my TEMS 9 on laptop..
the phone is detected.. but only data part connects right .. Air interface connection fails everytime.. "Connect fail" or something similar.. I don't remember
I changed drivers.. reinstall them again.. still nothing ...
any idea what is happening ??
BR,
drJ
Try to reinstall driver....
try to reflash again your phone
try to rebase gdfs again...
check io your phone...
if still can not....
buy new phone
check license of tems investigation & make sure your license support for your phone
(default password = "topixfine")
Bookmarks