Thanks Thanks:  8
Showing results 1 to 7 of 7

Thread: WCDMA PS Troubleshooting cases related to hardware and configuration

  1. #1
    VIP Member Reputation: 1123
    Join Date
    2011-03-10
    Posts
    127


    1 out of 1 members found this post helpful.

    Default WCDMA PS Troubleshooting cases related to hardware and configuration

    Here are some WCDMA PS Troubleshooting Cases from Huawei. These cases may appear in other vendor's network.

    1. Duplicated ippath configuration of 2 NodeBs lead the RNC setup the PS service failure
    2. PS RAB setup successfully rate is low due to IUB congestion
    3. RRC failure problem in IP transmission WRBS
    4. The inconsistence of IP address of PS plane results in the PS service abnmal
    5. the UE which handover from R99 cell to HSPA cell can not do H service
    6. User can not continue with the IUPS service after certain seconds because of the problem of SGSN
    7. very high PS drop call rate
    8. Web browse failure due to default security setting of Huawei GGSN
    9. When I test the WCDMA case Periodic URA Update_ I can not get the expected result as the document description
    10. Whole Network Low Throughput Issue due to Insufficient Bandwidth of Gi Interface
    11. Wrong configuration caused the PS user disconnect each 20 seconds
    12. Wrong VRRP Configuration Cause Abnormal PS behavior

    (see default pw)
    Attached Files Attached Files
    Default pw: qualcomm999

  2. Thanks justdream, leteo thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    BannedUser Reputation: -1
    Join Date
    2011-07-17
    Posts
    33


    Default Re: WCDMA PS Troubleshooting cases related to hardware and configuration

    Quote Originally Posted by qualcomm View Post
    Here are some WCDMA PS Troubleshooting Cases from Huawei. These cases may appear in other vendor's network.

    1. Duplicated ippath configuration of 2 NodeBs lead the RNC setup the PS service failure
    2. PS RAB setup successfully rate is low due to IUB congestion
    3. RRC failure problem in IP transmission WRBS
    4. The inconsistence of IP address of PS plane results in the PS service abnmal
    5. the UE which handover from R99 cell to HSPA cell can not do H service
    6. User can not continue with the IUPS service after certain seconds because of the problem of SGSN
    7. very high PS drop call rate
    8. Web browse failure due to default security setting of Huawei GGSN
    9. When I test the WCDMA case Periodic URA Update_ I can not get the expected result as the document description
    10. Whole Network Low Throughput Issue due to Insufficient Bandwidth of Gi Interface
    11. Wrong configuration caused the PS user disconnect each 20 seconds
    12. Wrong VRRP Configuration Cause Abnormal PS behavior

    (see default pw)
    Hi qualcomm
    can you send me a doc about WCDMA PS Troubleshooting cases related to hardware and configuratio of Huawei on my e-mail or free server . I cannot download it.
    my e-mail :junioba@hotmail.fr

    Thank a lot

  5. #3
    Junior Member Reputation: 10
    Join Date
    2011-08-10
    Posts
    4


    Default Re: WCDMA PS Troubleshooting cases related to hardware and configuration

    Hi good ones except I canèt download

  6. #4
    Member Reputation: 29
    Join Date
    2009-11-03
    Posts
    20


    Default Re: WCDMA PS Troubleshooting cases related to hardware and configuration

    Hi

    What is PWD???

  7. #5
    VIP Member Reputation: 1123
    Join Date
    2011-03-10
    Posts
    127


    Default Re: WCDMA PS Troubleshooting cases related to hardware and configuration

    Quote Originally Posted by LastBs View Post
    Hi

    What is PWD???
    using default pw: qualcomm999
    Last edited by qualcomm; 2011-08-11 at 05:15 PM
    Default pw: qualcomm999

  8. #6
    BannedUser Reputation: -1
    Join Date
    2011-07-17
    Posts
    33


    Default Re: WCDMA PS Troubleshooting cases related to hardware and configuration

    Quote Originally Posted by qualcomm View Post
    using default pw: qualcomm999
    just for remenber ,

    I need this doc but I can not download it .
    It is possible to share it in a free server

    Thanks for your help.

  9. #7
    BannedUser Reputation: -1
    Join Date
    2011-07-17
    Posts
    33


    Default DCR in HSUPA and HSDPA

    Hi my freind thank for this doc .

    do you have a other about analysis call drop in HSUPA and HSDPA ?

    Thank a lot

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •