Recording of Huawei CHR log

[blueee]

Hi,

Is anyone know how to do a Huawei CHR recording ? Does the system collect the CHR log automatically?
How can I record a specific period of CHR log ?

[kaizzer545]

I'm interested over this too, please somebody that share something

BR

[kamy]

Hi,

Is anyone know how to do a Huawei CHR recording ? Does the system collect the CHR log automatically?
How can I record a specific period of CHR log ?

for RNC it is automatically, for nodeB manually selected

[qualcomm]

Hi,

Is anyone know how to do a Huawei CHR recording ? Does the system collect the CHR log automatically?
How can I record a specific period of CHR log ?

For NodeB, you use "SET CHRSW" MML command for setting NodeB CHR log.

See picture below

[kamy]

To collect the NB CHR log, perform as below:
1) Get the IP address of the PC (e.g. 10.158.48.108) and create a directory for the log gathering (e.g. C:\CHRDATA\)
2) start the NodeB LMT
3) execute MML command "SET CHRLEVEL: CHRLEVEL=DETAIL;"
4) execute MML command "SET CHRSW: CHRSW=ON, CHRTYPE=ALL, IP="10.158.48.108", DSTF="C:\CHRDATA\", USR="admin", PWD="admin";
5) After about 6 mins later, check if there is any CHR log uploaded to the directory "C:\CHRDATA".
6) Collect the log as required (e.g. during the call test)
7) After the log collection is completed, disable the CHR log function by execute MML command "SET CHRSW: CHRSW=OFF;" and "SET CHRLEVEL: CHRLEVEL=NONE;"

[mobilink999]

whats the advantage of NodeB CHR LOG over that of the one we get from RNC???

[TEMS]

To collect the NB CHR log, perform as below:
1) Get the IP address of the PC (e.g. 10.158.48.108) and create a directory for the log gathering (e.g. C:\CHRDATA\)
2) start the NodeB LMT
3) execute MML command "SET CHRLEVEL: CHRLEVEL=DETAIL;"
4) execute MML command "SET CHRSW: CHRSW=ON, CHRTYPE=ALL, IP="10.158.48.108", DSTF="C:\CHRDATA\", USR="admin", PWD="admin";
5) After about 6 mins later, check if there is any CHR log uploaded to the directory "C:\CHRDATA".
6) Collect the log as required (e.g. during the call test)
7) After the log collection is completed, disable the CHR log function by execute MML command "SET CHRSW: CHRSW=OFF;" and "SET CHRLEVEL: CHRLEVEL=NONE;"

Hi Kamy,
How to get CHR 2G use BSC 6900

Thanks

[TEMS]

For NodeB, you use "SET CHRSW" MML command for setting NodeB CHR log.

See picture below

Hi friend,
How to get CHR 2G from BSC 6900 and M2000

Million thanks for help

[blueee]

Got these chr collecting information from the internet...

Importing CHR data Into Xeus Pro


/Br

[srilasitha]

Does anyone tried CHR analysis on GSM