WCDMA Test Guide

[qualcomm]

Contents:

Overview of WCDMA Tests. 10
1 Drive Test11
1.1 Preparation before the Drive Test11
1.1.1 Test Tools and Vehicles. 11
1.1.2 Selection of DT Routes. 14
1.1.3 Confirmation of Test Conditions. 14
1.1.4 DT Personnel and Time Schedule. 15
1.1.5 CN Test Devices. 15
1.2 DT Items. 16
1.3 PROBE DT Preparations. 17
1.3.1 Probe Version. 17
1.3.2 Preparing Test Devices. 18
1.3.3 Hardware Configuration. 20
1.3.4 Importing BTS Information. 23
1.3.5 Adjusting PC Time. 24
1.3.6 Making Test Plan for Each Test Item.. 25
1.4 Selecting a Test Window. 35
1.4.1 Active Set and Neighbor Cell36
1.4.2 RRC Signaling. 37
1.4.3 Map Setting and Displaying. 37
1.4.4 Scanner TopN Pilot38
1.4.5 Scanner Pilot Scan. 38
1.4.6 HSDPA Window. 38
1.4.7 Other Windows. 42
1.5 Rules for Storing Test Data. 43
1.6 Playing Back Test Data. 43
2 Tests in the Network Optimization Phase. 44
2.1 Tests in the Single Site Verification Phase. 44
2.1.1 List of Single Site Verification Items. 44
2.1.2 Test Methods for Each Check Item.. 45
2.2 Tests in the RF Optimization Phase. 45
2.2.1 List of RF Optimization Test Items/Tasks. 45
2.2.2 Test Item or Task Description. 46
2.3 Tests and Data Collection in the Service Optimization Phase. 50
2.3.1 List of Service Optimization Test Items. 50
2.3.2 Collection of Other Data. 51
2.3.3 Brief Introduction to Service Optimization Process. 53
2.4 Test Problem Analysis. 54
2.4.1 List of Cases. 55
2.4.2 Detailed Answers. 56
3 KPI Acceptance Test of UMTS Radio Network. 76
3.1 Preparation before Acceptance Test76
3.1.1 Determining Acceptance Area and Route. 76
3.1.2 Selection of 2G and 3G Interoperability Scenarios. 78
3.1.3 Selection of Delay Test Scenario. 79
3.1.4 Description of Uplink and Downlink Load. 80
3.2 Standards and Methods of DT Acceptance Test80
3.2.1 DT Acceptance Indexes. 80
3.2.2 Definitions and Test Methods of DT Acceptance Indexes. 83
3.3 Standards and Methods of CQT Test Acceptance. 121
3.3.1 CQT Acceptance Indexes. 121
3.3.2 Definitions and Test Methods of CQT Acceptance Indexes. 122
3.4 RAN Traffic Statistics Acceptance. 135
3.4.1 Traffic Statistics Acceptance Indexes. 135
3.4.2 Definitions and Statistics of Traffic Statistics Acceptance Indexes. 137
4 Summary. 148
5 Appendix. 149
5.1 Method for Setting APN and QoS with Modem Initiation Command. 149
5.2 BLER Analysis Method in the Assistant150
5.2.1 Problem Description. 150
5.2.2 Analysis Method. 151
5.2.3 Experience Summary. 154
5.3 Manual Dialup Methods. 155
5.3.1 Dialup Method of E620 Data Card. 155
5.3.2 Dialup Method of the Test Handset156
5.4 Condition of PS Service Over HSDPA. 156
5.5 Common Windows and Corresponding Logmask. 157
6 References:159