-
Member
Reputation: 39
UL Load Factor (%)
Hello, did anybody calculate UL Load Factor for 3G Huawei?
I've found 2 formulas (depends, which CAC algorithms do i use on my Network):
a) UL load factor = 1 - (cell background noise/UL RX total wideband power)
I can get RTWP (from m2000), but cell background noise from the system - Background noise[0.1dBm] = 61 (constant). For idle cell UL load factor will be 1-6,1/-104=(1+0,06)*100%= ???? And what do we have.....UL Load more than 100%???
b) The ratio of the current number to the maximum number of UL equivalent users to measure the load of the cell. Maximum number is a constant = 80, but current i cen get only from Trace viewer. It is not a sollution.
Do anybody know, how to calculate UL Load Factor%?
-
2011-06-17 12:37 AM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 402
Re: UL Load Factor (%)
Originally Posted by
_lisi4king
Hello, did anybody calculate UL Load Factor for 3G Huawei?
I've found 2 formulas (depends, which CAC algorithms do i use on my Network):
a) UL load factor = 1 - (cell background noise/UL RX total wideband power)
I can get RTWP (from m2000), but cell background noise from the system - Background noise[0.1dBm] = 61 (constant). For idle cell UL load factor will be 1-6,1/-104=(1+0,06)*100%= ???? And what do we have.....UL Load more than 100%???
b) The ratio of the current number to the maximum number of UL equivalent users to measure the load of the cell. Maximum number is a constant = 80, but current i cen get
only from Trace viewer. It is not a sollution.
Do anybody know, how to calculate UL Load Factor%?
Hi
Correct you formula for Backgroud noise as
Back_noise=-112+(Step-1)*0.1. in your case it will be Back_nose=-112+(61-1)*0.1=-106 dBm.
now to calculate your UL utilization you must first convert the dBms for backnoise and RTWP to Watts and do the maths. we don't devide or multiply dB or dBm :-) remember that
2- for your second formula, you can get the EUN from the counters. look for the BH only or get the Mean of the max because you want to look in the worst case.
Future Belongs to those possessing beautiful DREAMS
----------------------------------------------------
PWD:f1net0p1x
-
Member
Reputation: 39
Re: UL Load Factor (%)
Originally Posted by
qaqa
Hi
Correct you formula for Backgroud noise as
Back_noise=-112+(Step-1)*0.1. in your case it will be Back_nose=-112+(61-1)*0.1=-106 dBm.
now to calculate your UL utilization you must first convert the dBms for backnoise and RTWP to Watts and do the maths. we don't devide or multiply dB or dBm :-) remember that
2- for your second formula, you can get the EUN from the counters. look for the BH only or get the Mean of the max because you want to look in the worst case.
Thanks a lot for response, but can you clarify for me some issues from your explanation:
1) Im i right, at first i need to calculate Back_noise in accordance with formula Back_noise=-112+(Step-1)*0,1 than convert it to Watts, the next step -> convert RTWP to Watts and than divide Back_noise(W)/RTWP (W)
2) Can you explain, where did you get this formula? May be you have description? Back_noise=-112+(Step-1)*0,1
3) Did you work with Huawei equipment? Did you see counter which count EUN, because i really can not find it .
Thanks for your help!
Last edited by _lisi4king; 2011-06-17 at 03:36 AM
-
Member
Reputation: 172
Re: UL Load Factor (%)
Originally Posted by
_lisi4king
Hello, did anybody calculate UL Load Factor for 3G Huawei?
I've found 2 formulas (depends, which CAC algorithms do i use on my Network):
a) UL load factor = 1 - (cell background noise/UL RX total wideband power)
I can get RTWP (from m2000), but cell background noise from the system - Background noise[0.1dBm] = 61 (constant). For idle cell UL load factor will be 1-6,1/-104=(1+0,06)*100%= ???? And what do we have.....UL Load more than 100%???
b) The ratio of the current number to the maximum number of UL equivalent users to measure the load of the cell. Maximum number is a constant = 80, but current i cen get only from Trace viewer. It is not a sollution.
Do anybody know, how to calculate UL Load Factor%?
To be more precisely you have counters and real time traces for both. Does anyone have doc/info about relation between RTWP and ENU??? THis information will be very important and appreciated.
BR
Alex
-
Member
Reputation: 39
Re: UL Load Factor (%)
Originally Posted by
agenov
To be more precisely you have counters and real time traces for both.
BR
Alex
This is not suitable for me. I need to have UL load factor for all cells inside cluster (more than 100). And if we speack about BH, i need to have one value for day for every cell, for Month. If i will use real time trace, i will waste 1 year for this job
-
Senior Member
Reputation: 402
Re: UL Load Factor (%)
Hi
see my comments in Red
Originally Posted by
_lisi4king
Thanks a lot for response, but can you clarify for me some issues from your explanation:
1) Im i right, at first i need to calculate
Back_noise in accordance with formula Back_noise=-112+(Step-1)*0,1 than convert it to Watts, the next step -> convert RTWP to Watts and than divide Back_noise(W)/RTWP (W)==>
yes
2) Can you explain, where did you get this formula? May be you have description?
Back_noise=-112+(Step-1)*0,1 If you have the LMT check command ADD CELLCAC and look for Back_noise, from the explanation you can derive the formula
3) Did you work with Huawei equipment? Did you see counter which count EUN, because i really can not find it
.
if you have the HW performance decument look "ALGO.Cell"--> VS.RAC.DL.EqvUserNum
Thanks for your help!
Future Belongs to those possessing beautiful DREAMS
----------------------------------------------------
PWD:f1net0p1x
-
Member
Reputation: 39
Re: UL Load Factor (%)
Originally Posted by
qaqa
Hi
see my comments in Red
Thanks a lot.
-
Member
Reputation: 39
Re: UL Load Factor (%)
Originally Posted by
qaqa
Hi
see my comments in Red
Today i've checked your responce and i it is for me still is not clear:
1) -112 - what this? Because i've found only Background noice abnormal threshold (-100dBm). We use RAN 11.
2) And the second quastion is about VS.RAC.DL.EqvUserNum. I did not find it in M2000. May be it appeared in RAN 12?
-
Re: UL Load Factor (%)
Hi convert the dbm to mW or watt before calculating the formula
-
Member
Reputation: 39
Re: UL Load Factor (%)
Originally Posted by
gprastomo
Hi convert the dbm to mW or watt before calculating the formula
What do you mean?
Bookmarks