-
Member
Reputation: 47
Plz help: No MTC and MOC inside a certain LAC
Hi Guys,
In one of certain LACs I cannot make voice calls, but can use GPRS.
Whenever I change LAC, problem disappears.
Please tell what can be the reason...
Thx in advance,
Shuhratech
-
2011-06-08 01:53 PM
# ADS
Circuit advertisement
-
Member
Reputation: 73
Re: Plz help: No MTC and MOC inside a certain LAC
First, please check this LAC is defined in the MSC;
Secondly, you can check the C7 signaling link to MSC is normal if this LAC is in one whole BSC, the C7 link may not normal between BSC and MSC.
-
VIP Member
Reputation: 1118
Re: Plz help: No MTC and MOC inside a certain LAC
this is a common problem, please read network topology for CS and PS, very different way to access both of this traffic. LAC is for CS otherwise on PS using RAC
If this document usefull, then giving some
reputations is highly appreciated.
note : see default password
-
Member
Reputation: 47
Re: Plz help: No MTC and MOC inside a certain LAC
Originally Posted by
zhanglw268
First, please check this LAC is defined in the MSC;
Secondly, you can check the C7 signaling link to MSC is normal if this LAC is in one whole BSC, the C7 link may not normal between BSC and MSC.
You know, others could easily make CS...Thus, I think LAC is defined in MSC.
-
VIP Member
Reputation: 1791
Re: Plz help: No MTC and MOC inside a certain LAC
Originally Posted by
shuhratech
Hi Guys,
In one of certain LACs I cannot make voice calls, but can use GPRS.
Whenever I change LAC, problem disappears.
Please tell what can be the reason...
Thx in advance,
Shuhratech
what i am suspecting is Lac defination
check this LAC it should not be shared in two MSCs.
Auto_art Default PAS: london
pl rate threads for their usefulnes
share & care
-
Member
Reputation: 47
Re: Plz help: No MTC and MOC inside a certain LAC
Thx guys, I will forward this issue to NSS part...
BR,
Shuhratech
-
Member
Reputation: 260
Re: Plz help: No MTC and MOC inside a certain LAC
also after checking the definition at MSC end, check the length of the new LAC, should be less than 16 bits.
-
Member
Reputation: 39
Re: Plz help: No MTC and MOC inside a certain LAC
hello here are my inputs to your query.
1. Check what BSC is in that LAC since you can have multiple BSCs in one LAC.
2. Check the signaling links of the BSC in the A-Interface. It should be able to cater SLS codes and status should be up and working.
3. Check the definition of LAC both for BSS and NSS. Check if corresponding point codes of BSC and MSC is correctly configured.
4. Check the LAC definition in NSS if the LAC is configured for the local MSC. It might be configured as LAC for adjacent MSC which is used for inter MSC handover.
5. If you had check all the above statements and found no problem try checking for cell restrictions in all sites. But I think you can already pin point the problem with the above 4 statements.
For immediate troubleshooting, send a tester in the BSC coverage and trace the subscriber at NSS side.
If you still have problems, please let me know.
-
VIP Member
Reputation: 1791
Re: Plz help: No MTC and MOC inside a certain LAC
Originally Posted by
shuhratech
Hi Guys,
In one of certain LACs I cannot make voice calls, but can use GPRS.
Whenever I change LAC, problem disappears.
Please tell what can be the reason...
Thx in advance,
Shuhratech
did ur prob get resolved ? or u are still suffering with same..pl share..!
Auto_art Default PAS: london
pl rate threads for their usefulnes
share & care
-
Member
Reputation: 47
Re: Plz help: No MTC and MOC inside a certain LAC
Hi dear Friends,
Problem got finally solved.
This issue was forwarded to vendor, because this problem was seen in recently swapped region.They've solved, but we don't know how
Thanks to everyone who tried to help me
Good luck!!!
BR,
Shuhratech
Bookmarks