Huawei HO Parameter

[T_ADD]

try the attached document. i haven't read it myself. you didn't specify for CDMA or GSM.

this one's for CDMA.

[Rodbar]

Thank you very much, my friend. I just forgot this information. I'm working on 2G and 3G networks. Both of them with Huawei technology.

But in this case I'm talking about 2G Huawei parameters.

Anyway, your document wil be very useful, I'm sure.

Thank you very much!

RB

[adewijaya]

all ways is the same, just search on Huawei name of parameter. I have on NSN parameter , like below :

[mohyedeen_alkousy]

Hi
regarding your case you want to direct the traffic to specific neighbor
if the BSC is BSC6000 then you should change the parameter Load Req.on Candidate Cell

if the BSC is BSC6900 then you should change the parameter Load handover Load Accept Threshold

also to play with the aggressiveness of Load handover in Huawei you can use the following parameters :

Load HO Threshold
Load HO Bandwidth
Load HO Step Period[s]
Load HO Step Level

to add reputation if useful

[adewijaya]

Hi
regarding your case you want to direct the traffic to specific neighbor
if the BSC is BSC6000 then you should change the parameter Load Req.on Candidate Cell

if the BSC is BSC6900 then you should change the parameter Load handover Load Accept Threshold

also to play with the aggressiveness of Load handover in Huawei you can use the following parameters :

Load HO Threshold
Load HO Bandwidth
Load HO Step Period[s]
Load HO Step Level

to add reputation if useful

attach some document will be better to know about all this Huawei parameter

[mohyedeen_alkousy]

all ways is the same, just search on Huawei name of parameter. I have on NSN parameter , like below :

can u put clear image please

[adewijaya]

can u put clear image please

DL this first, i already UL picture to see for more clearly

[mohyedeen_alkousy]

attached is BSC6900 R13 all Parameters in Excel sheet with explanation
also attached is BSC6000 R8 all Parameters in PDF

[adewijaya]

attached is BSC6900 R13 all Parameters in Excel sheet with explanation
also attached is BSC6000 R8 all Parameters in PDF
alquasi.mohiedeen at gmail dot com
can u share

i think is description about how optimize the problem, but this is parameter description in Huawei that already uploaded in this Huawei Forums Section

[mohyedeen_alkousy]

if u understand the function of each parameter exactly then the rest is easy
if u want to increase the load handover to specific neighbor then u have to in crease the parameter Load Req.on Candidate Cell
if i want to increase the Number of load handovers then i should decrease the parameter load handover threshold

off course i should be very careful when i change these parameters not to increase drop , i should make sure that load handover happened only to target cells with good conditions