-
HSDPA link capacity dimensioning
Dears
How many E1 links per site are required to support HSDPA services up to 7.2 Mbps rate in case of Ip transmission ?
Thank you
BR
-
2011-05-09 07:18 PM
# ADS
Circuit advertisement
-
Member
Reputation: 149
Re: HSDPA link capacity dimensioning
for Iub planning, it's easy way at least to guarantee 7,2Mbps so minimum on your IuB transmission must be (2Mbps x 4) = 4 E1 dedicated for one user HSDPA but in detail calculate to accommodate overhead is must digging my literature first
-
Re: HSDPA link capacity dimensioning
Originally Posted by
riyantoyadi
for Iub planning, it's easy way at least to guarantee 7,2Mbps so minimum on your IuB transmission must be (2Mbps x 4) = 4 E1 dedicated for one user HSDPA but in detail calculate to accommodate overhead is must digging my literature first
I also calculated 4 E1, but vendor is requesting 8 E1, are you sure 4 E1 will be enough ?
Thank you
-
Member
Reputation: 149
Re: HSDPA link capacity dimensioning
as I said before, I'm sure if your services just for one HSDPA user not consider with signalling and others traffic (CS and PS), but 8E1 very unbelievable to request for
-
Re: HSDPA link capacity dimensioning
The 8E1 requested are for HSDPA + R99 CS & PS all together.
-
VIP Member
Reputation: 1118
Re: HSDPA link capacity dimensioning
Hi bro, i will make some simple review :
1. HSDPA user allowed let's say 64 user will be guarantee until 512 kbps
=> 32x384kbps = 12,3 Mbps (4E1)
2. PS R99
- PS 64 x 10 = 640 kb
- PS 128 X 2 = 256 kb
- PS 381 x 1 = 384 kb
total = 1,3 Mb
3. Voice : 200x16kb = 3,2
so, depend your planning guidance about serve the all services
-
Member
Reputation: 81
Re: HSDPA link capacity dimensioning
Depends on the amount of user lic in HSDPA and also the CE UL & DL you will have.
Initialy we start with 4E1 or 10mp IP RAN Ethernet for a 16users HS and 192CE. When HSDPA traffic increase then you add user lic and CE.
-
VIP Member
Reputation: 1118
Re: HSDPA link capacity dimensioning
depend what's vendor using, anyway CE not related with throughput but code HSPDCH that you set in each sector
-
VIP Member
Reputation: 1625
Re: HSDPA link capacity dimensioning
Last edited by koepret; 2011-05-11 at 12:54 AM
-
Re: HSDPA link capacity dimensioning
Originally Posted by
koepret
Is there any rule of thumbs for this IuB planning?
such as:
HSDPA throughput:
3.6 Mbps
7.2 Mbps
14.4 Mbps
21 Mbps
etc..
Bookmarks