Thanks Thanks:  0
Showing results 1 to 1 of 1

Thread: WCDMA events description

  1. #1
    Member Reputation: 218
    Join Date
    2010-10-26
    Posts
    99


    Default WCDMA events description

    Hi all,

    Intra-frequency measurements
    Reporting event 1A: A Primary CPICH enters the reporting range
    Reporting event 1B: A primary CPICH leaves the reporting range
    Reporting event 1C: A non-active primary CPICH becomes better than an active primary CPICH
    Reporting event 1D: Change of best cell
    Reporting event 1E: A Primary CPICH becomes better than an absolute threshold
    Reporting event 1F: A Primary CPICH becomes worse than an absolute threshold Intra-frequency reporting events for TDD
    Reporting event 1G: Change of best cell (TDD)
    Reporting event 1H: Timeslot ISCP below a certain threshold (TDD)
    Reporting event 1I: Timeslot ISCP above a certain threshold (TDD)
    Inter-frequency measurements
    Event 2a: Change of best frequency.
    Event 2b: The estimated quality of the currently used frequency is below a certain threshold and the estimated quality of a non-used
    frequency is above a certain threshold
    Event 2c: The estimated quality of a non-used frequency is above a certain threshold
    Event 2d: The estimated quality of the currently used frequency is below a certain threshold
    Event 2e: The estimated quality of a non-used frequency is below a certain threshold
    Event 2f: The estimated quality of the currently used frequency is above a certain threshold
    Inter-RAT measurements
    Event 3a: The estimated quality of the currently used UTRAN frequency is below a certain threshold and the estimated quality of the other system is above a certain threshold
    Event 3b: The estimated quality of other system is below a certain threshold
    Event 3c: The estimated quality of other system is above a certain threshold
    Event 3d: Change of best cell in other system
    UE internal measurements
    Reporting event 6A: The UE Tx power becomes larger than an absolute threshold
    Reporting event 6B: The UE Tx power becomes less than an absolute threshold
    Reporting event 6C: The UE Tx power reaches its minimum value
    Reporting event 6D: The UE Tx power reaches its maximum value
    Reporting event 6E: The UE RSSI reaches the UE's dynamic receiver range
    Reporting event 6F: The UE Rx-Tx time difference for a RL included in the active set becomes larger than an absolute threshold
    Reporting event 6G: The UE Rx-Tx time difference for a RL included in the active set becomes less than an absolute threshold

    Walid

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •