MODEL TUNING WITH EXISTING GSM BTS AND TEMS GUIDELINES

[yellowant]

MODEL TUNING WITH EXISTING GSM BTS AND TEMS GUIDELINES.
Your rep is high appriciated

[zoro78]

appreciate this report but there are many mistakes like:
- calibration is preferred by CW measurements
- is we need to use existing BTSs in the network it is preferred to use scanning mode rather than the dedicated mode.
- after scanning you can use special exporting format as txt from tems including the scanned channels and BSIC to filter unwanted BSIC that might available
- number of measurement samples is much much bigger that mentioned almost for each clutter type 10000 sample i.e 2 hrs driving with less than 60Km/h in the care also in main beam of antenna