-
Power Control
Dear All,
Is there any impact on coverage when deactivating the Power Control on a cell?
Can any help?
-
2011-02-14 07:07 AM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 1795
Re: Power Control
no it wont...because on pilot carrier i mean bcch carrier power control does not work or you can say as per specs power control is disabled on the BCCH carrier..!!
Auto_art Default PAS: london
pl rate threads for their usefulnes
share & care
-
Member
Reputation: 20
Re: Power Control
just to add the importance of power control below is the frequency
for gsm - its 2hz
for cdma - its 800hz
for wcdma - its 1500hz (inner loop)
-
Member
Reputation: 19
Re: Power Control
A small correction for auto_art post:
Power control in BBH doesn't work only in BCCH timeslot not whole TRX. It is not working in whole BCCH TRX only in SFH or non hopping configurations.
-
Post Thanks - 1 Thanks
-
Member
Reputation: 37
Re: Power Control
no problem, but PC activatio lead to impact coverage.
BR
-
Senior Member
Reputation: 491
Re: Power Control
Originally Posted by
m121
A small correction for auto_art post:
Power control in BBH doesn't work only in BCCH timeslot not whole TRX. It is not working in whole BCCH TRX only in SFH or non hopping configurations.
Dear, could you kindly explain why we have difference effect of PC in BCCH between (BBH & SFH)?
-
Member
Reputation: 270
Re: Power Control
Originally Posted by
justdream
Dear, could you kindly explain why we have difference effect of PC in BCCH between (BBH & SFH)?
For that you need to see how the hopping works!!! to be clear Power control has no impact on coverage whatsoever be the case or any value as coverage is idle mode stuff which in general is always transmitting at max power until and unless some very specific energy reduction feature are working!!!.. where BCCH TRX can be powered down by 2db where you will have some shrinkage!!.
If you think this has been useful adding to the Reputation is appreciated
Default Pass: Nsn@12345678
-
Post Thanks - 1 Thanks
Bookmarks