-
Member
Reputation: 16
Emulator and Instruction of Sentinel vUSB
Follow the steps below:
1. Dump dongle with PVA 3.3 util with out "Brute WP" selected.
2. Solve the DMP file using "f1_nodongle" (10x to cEnginEEr) util, you should get XXXX.SSP file (~100kb).
3. Use "UniDumpToReg" util to convert the SSP to REG. Inside"UniDumpToReg" select your SSP file and then select "SafeKey ssp ->vUSB Sentinel" option and push "GO".
4. Open the REG file in Notepad or any other text editor and make the following changes:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\Emulator\Sentinel\Dump\XXXX0000]
To
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\ru-board\mulators\Dump\XXXX0000]
"sntMemory"=hex:0A3E,1255,C5E3,0000,0009…..
To
"sntMemory"=hex:3E,0A,55,12,E3,C5,00,00,09,00… .. make this comma add and switch up to the end of this cell
5. Run "install.bat" from "vusbus" folder
6. Your machine should found new hardware and install it by it self
7. Import your changed REG in to the REGISTRY
8. Reboot
For the softwares which used send PM
-
2008-09-25 08:53 PM
# ADS
Circuit advertisement
-
Member
Reputation: 29
no need reboot ,just change the step 7 to 5 .
enjoy every one .
-
VIP Member
Reputation: 263
-
Finally someone decides to share some tips on how to work this SENTINEL dongle copy stuff.
I will try this out and if successfull will share the fruits (nemo outdoor & analyze with rest of the forum)
Originally Posted by
shahabmc
Follow the steps below:
1. **** dongle with PVA 3.3 util with out "Brute WP" selected.
2. Solve the DMP file using "f1_nodongle" (10x to cEnginEEr) util, you should get XXXX.SSP file (~100kb).
3. Use "Uni****ToReg" util to convert the SSP to REG. Inside"Uni****ToReg" select your SSP file and then select "SafeKey ssp ->vUSB Sentinel" option and push "GO".
4. Open the REG file in Notepad or any other text editor and make the following changes:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\********\Sentinel\****\XXXX0000]
To
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\ru-board\mulators\****\XXXX0000]
"sntMemory"=hex:0A3E,1255,C5E3,0000,0009…..
To
"sntMemory"=hex:3E,0A,55,12,E3,C5,00,00,09,00… .. make this comma add and switch up to the end of this cell
5. Run "install.bat" from "vusbus" folder
6. Your machine should found new hardware and install it by it self
7. Import your changed REG in to the REGISTRY
8. Reboot
For the softwares which used send PM
-
Member
Reputation: 27
Originally Posted by
gsmmangi
Finally someone decides to share some tips on how to work this SENTINEL dongle copy stuff.
I will try this out and if successfull will share the fruits (nemo outdoor & analyze with rest of the forum)
Thank u.
BR
Last edited by abc123ww; 2009-08-04 at 10:15 PM
Bookmarks