is there a command in MML to be executed in BSCs that displays the current status of Site's TRX (blocked/unblocked/manually blocked)? My BSC6000 is V9 R8. Thanks!
IDNameDescriptionIDXTYPEIndex typeMeaning: how to specify a BTS
Value range: BYNAME(By Name), BYIDX(By Index)
Explanation: This parameter determines whether to specify a BTS by its name or index.
Default value: None
BTSIDXBTS IndexMeaning: BTS index
Value range: 0-2047
Explanation:
1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC.
2. This parameter is mandatory if Index Type is set to BYIDX(By Index).
Default value: None
BTSNAMEBTS NameMeaning: BTS name
Value range: 1-32 characters
Explanation:
1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC.
2. This parameter is mandatory if Index Type is set to BYNAME(By Name).
Default value: None
TRXTRX No.Meaning: TRX number
Value range: 0-71
Explanation:
1. This parameter specifies the TRX number.
2. If this parameter is not specified, the channels of all the TRXs in the specified BTS are queried.
Thanks for that knowledge. i also tried that but it seems that there is no 1 MML command in M2000 that will print the status of the TRX in a BSC unlike the M2000 in monitoring for NodeB.
Bookmarks