Thanks Thanks:  1
Page 1 of 6 123 ... LastLast
Showing results 1 to 10 of 58

Thread: Latest TEMS & Qualcomm Activation

  1. #1
    Member Reputation: 39
    Join Date
    2007-06-10
    Posts
    114


    Default Latest TEMS & Qualcomm Activation

    Hi All!
    How to Active "Some commercial Qualcomm chipset derived phones and data cards may not have diagnostics reporting enabled by default" without contact E******* Support ?

    Refer to:
    http://www.e*******.com/solutions/te...swhw_9.0.shtml

    Some commercial Qualcomm chipset derived phones and data cards may not have diagnostics reporting enabled by default, and E******* is not at liberty to distribute information on how to enable this function. Customers desiring to use such devices with TEMS Investigation therefore need to contact the relevant supplier or operator in each case. These phones are marked with * in the table below.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Junior Member Reputation: 10
    Join Date
    2007-04-10
    Posts
    21


    Default

    which equipment model you wish to activate..?

  4. #3
    Junior Member Reputation: 11
    Join Date
    2007-03-27
    Posts
    266


    Default

    还是比较容易的,不很难

  5. #4
    Member Reputation: 39
    Join Date
    2007-06-10
    Posts
    114


    Default

    Original posted by hua1687 at 2008-9-16 10:53
    还是比较容易的,不很难
    How to Active I`ts ?
    you say "It is quite easy, not difficult"
    Please share the info!

    [ Last edited by Optim_z at 2008-9-16 12:13 ]

  6. #5
    Moderator Reputation: 520
    Join Date
    2008-04-11
    Posts
    431


    Default

    Hi All
    So far that i have tested, Samsung SGH-Z560 and SGH-Z720 Phones are connectable with TEMS Investigation and can perform good measurement without any need of a special firmware. As well as almost all (but not all) Samsung CDMA phones, as they are an Qualcomm based phones. Also ******** CDMA Phones as V3m, V3c, W362 etc.... It's nice to try, but I think E******* put no warranty on this as we can buy it freely from the open market.
    Regards
    parto_tegal
    Regards
    parto_tegal

    ---------------
    PW: partotegaltegalparto

  7. #6
    Member Reputation: 474
    Join Date
    2008-09-11
    Posts
    465


    Default

    nice tek talk

  8. #7
    Member Reputation: 212
    Join Date
    2008-08-13
    Location
    PNG
    Posts
    339


    Default

    Hi Parto-tegal,

    Will a Samsung SGH-Z750 as be able to connect to TEMS Investigation with any special firmware loaded?

    All I have to do is find the correct phone drivers and thats it?


    Please confirm???



    THANKS,,,




    Quote Originally Posted by parto_tegal View Post
    Hi All
    So far that i have tested, Samsung SGH-Z560 and SGH-Z720 Phones are connectable with TEMS Investigation and can perform good measurement without any need of a special firmware. As well as almost all (but not all) Samsung CDMA phones, as they are an Qualcomm based phones. Also ******** CDMA Phones as V3m, V3c, W362 etc.... It's nice to try, but I think E******* put no warranty on this as we can buy it freely from the open market.
    Regards
    parto_tegal

  9. #8
    Member Reputation: 54
    Join Date
    2009-03-21
    Posts
    50


    Default

    Quote Originally Posted by bikplaboi View Post
    Hi Parto-tegal,

    Will a Samsung SGH-Z750 as be able to connect to TEMS Investigation with any special firmware loaded?

    All I have to do is find the correct phone drivers and thats it?


    Please confirm???



    THANKS,,,
    Yes you can!

    i have a Samsung SGH-G400L and it works nice, you just have to download the Qualcomm Drivers

  10. #9
    Member Reputation: 17
    Join Date
    2008-07-06
    Posts
    29


    Default Kyocera KX2

    Kyocera KX2 connects easily , there is no requirement for special firmware, I have tested it, and kyocera is supposed to be good phone for measurement and goos sensitivity.

    vibs

  11. #10
    Member Reputation: 15
    Join Date
    2009-04-17
    Posts
    17


    Default

    Will a phone based qualcomm MSM7200 as be able to connect to TEMS Investigation with any special firmware loaded?

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •