Yes there is! you need to activate SRB over HSUPA in order to free codes for higher rates. Be advised however that it is a licensed feature you need to have in order to turn it on.
Reputation: 21
HSUPA 5,7 Mbps
Hi,
Using an UE which supports 5?7 Mbps in UL and activating HSUPA TTI 2 ms on the RNC side, I did'nt get more than 2,6 Mbps. Is there other setting to be changed on Huawei RAN.10 to reach 5,7 Mbps.
BR
Reputation: 62
Re: HSUPA 5,7 Mbps
Yes there is! you need to activate SRB over HSUPA in order to free codes for higher rates. Be advised however that it is a licensed feature you need to have in order to turn it on.
Reputation: 21
Re: HSUPA 5,7 Mbps
Thanks,
Is there another method to free codes ? I found that SRB over HSPA increases the drop PS considerably.
BR
Reputation: 62
Re: HSUPA 5,7 Mbps
No, there isn't. You wouldn't reach higher throughput without multiplexing srb on hsupa channel.
Reputation: 94
Re: HSUPA 5,7 Mbps
Is there any kind of limitation from CN side?
Reputation: 172
Re: HSUPA 5,7 Mbps
all related nodes in the CN must support it as well - hardware, software, licenses and etc...Originally Posted by punchi
Reputation: 94
Re: HSUPA 5,7 Mbps
what's the related parameters we can check beside the max uplink throughput?
Reputation: 16
Re: HSUPA 5,7 Mbps
In NSN network there is a parameter Maximum target received wide band power for BTS witch default value in some case can limit the maximum HSUPA throughput. It should be changed to higher value. May be Huewei has something the same.
Reputation: 73
Re: HSUPA 5.7 Mbps
1. check HLR's profile for the USIM whether the UL supports 5.7 Mbps
2. check SGSN and GGSN QoS support UL 5.7 Mbps
3. check RNC and NodeB license for supporting 5.7Mbps
4. check SRB over E-DCH switch
4. check IuB transmission configuration supporting 5.7Mbps for SCR, RCR and PCR, make sure that the configuration between RNC and NodeB is matched.
Posting Rules
Bookmarks