1. This release contains support for new and updated file formats. There are updates for most technologies that Actix supports, with changes falling under the following categories:
• New collection device support
• Decode improvements
• New attributes / modifications to existing attributes
• New mobile device support in existing formats
• Improvements to existing decodes
• Improvements to event detection
• Format Group issues (for example, binning)
• Stability improvements
• Event detection and Application layer improvements
• Analyzer / Spotlight improvements
• Known issues / obsolescence
2 New collection device or technology support
• Added support for Agilent NiXT 15.1.
• Added support for a new scanner in DingLi: DTIUMTS2110.
2.1 Accuver (Couei / WirelessLogix) support
2.2 Agilent NiXT support
• Added support for Agilent NiXT 15.1.
2.3 Comarco Seven.Five support
• [Case 53800] A problem has been resolved that caused devices to be missing in Analyzer. The problem occurred with some log files that had an unusual devices description header.
• [Case 54132] A problem has been resolved that caused devices to be missing when the logging kit was configured with 10 or more UE’s, because Analyzer was expecting the Comarco device identity to be only one digit in the log file header.
2.4 DingLi support
• [Case 53353] Added support for a new scanner in DingLi: DTIUMTS2110.
2.5 E******* GPEH / UETR call trace support
• A problem has been resolved that caused Analyzer to ignore the “.axf” side files if the path name for the side file was close to the Windows maximum of 256 characters.
2.6 Focus Infocom support
• [Case 53073] Attribute AMR_Codec_Type is now set to indicate whether the GSM AMR codec type is Full Rate or Half Rate.
Actix Release Notes Analyzer Update – September 2010
2.7 Invex NxG support
• [Case 51536] A problem has been resolved that could have caused the i.Scan scanner configuration attributes under “Vendor Specific > InvexNxG > IR Tasks” to be missing in Attribute Explorer when the preference “Load Time Message Filtering” was selected.
2.8 Nemo support
• The attribute Uu_HSDPA_PayloadRate_L1_Requested is now set correctly in HSPA+ mode when 64 QAM modulation is supported.
2.9 Qualcomm chipset support
• In LTE, more messages are now decoded in Message Browser.
• In LTE, Analyzer does not set the attribute LTE_UE_Power_Tx when the raw transmit power value logged in the log file is outside the range defined in Qualcomm specifications.
2.10 SwissQual support
• [Case 53690] Analyzer can now combine “A files” and “B files” at load time when the “A file” has a “.mf” file name extension and the “B file” a “.sqz” file name extension.
2.11 TEMS support
• [Case 51407] A problem has been resolved that caused log files containing a few corrupted messages to be only partially loaded in Analyzer, up to the first corrupted message. Analyzer now continues to load log files if a few corrupted messages are found, and only stops if there are more than 100 corrupted messages in a row.
2.12 Xtel support
• A problem has been resolved that caused some log files to fail to load. The issue occurred with a certain file’s header that Analyzer did not recognize.
2.13 Generic
• [Case 53784] In UMTS, a problem has been resolved that caused the UMTS scanner section of the UMTS Spotlight Report to be blank when the Spotlight
Actix Release Notes Analyzer Update – September 2010
Master Template was used. The reason for the problem was that the UMTS scanner queries that populate the report were missing in the template.
• [Case 53667, 53666] In CDMA, a problem has been resolved that prevented attribute Handoff_EVDO_1x_Type from being set correctly when a CDMA call was released normally.
• A problem has been resolved that caused Analyzer to ignore the “.axf” side files if the path name for the side file was close to the Windows maximum of 256 characters.
• A problem has been resolved that caused the “Favorites” and “Search Results” tabs to be missing in Attribute Explorer when running on the Windows Server 2003 operating system.
3 Application layer improvements
3.1 Improvements to the Chart view
• [Case 51415] A problem has been resolved that could occur when the user changed the order of the attributes displayed on a chart.
3.2 Improvements to the Map legend
• [Case 52889] New options have been added to the attributes’ contextual menu in the legend of the Map view. The contextual menu is opened by right-clicking on any attribute in the legend of Map view. The new options are:
Select all: this option ticks all the boxes in the map legend, so that all the elements in the map legend are shown on the map.
Unselect all: this option unchecks all the boxes in the map legend, so that none of the elements in the map legend are shown on the map.
Expand all: this option expands the format group of all the attributes in the map legend (but not the cell refs nodes).
Collapse all: this option collapses the entire node in the map legend (attributes, cell refs nodes…).
Actix Release Notes Analyzer Update – September 2010
3.3 Improvements to the “export to MapInfo” functionality
• [Case 52215] Before this release, Analyzer did not export values that were outside the range defined by the format group. This could be an issue for throughput attributes, where values could exceed the maximum value of the default format group (768 Kbps). Analyzer now exports all the values, regardless of whether they are within or outside the range defined in the format group.
Note: The “throughput” format group supports multiple ranges. Users can select the range they want to use by right-clicking on the attribute in the map legend and selecting “Set Legend To”:
3.4 Improvements to the GSM, UMTS and TD-SCDMA Protocol Stack Browser views
• [Case 53445] Message MM Authentication Failure has been added to the list of messages to which coloring and filtering can be applied in Protocol Stack Browser.
__________________
Cheers,. wnsworld
____________________________________ ..either you work smart or work more....
Please try my default passkey wnsjay before asking
Thanks: 
Actix Analyzer Update September 2010
Originally Posted by telwind
Bookmarks