-
Junior Member
Reputation: 12
Call Trace
Hi,
I have done BSS Level Call Trace(********), Even though the Manual says the output is As per the ETSI GSM 12.08 Standards. I could not get much from the GSM 12.08 Pdf. I am not able to decode the Hex Values (what does it mean, Order of Values etc., ) Can any one guide me in this regard
Thanks in Adv
-
2010-07-25 06:03 PM
# ADS
Circuit advertisement
-
Member
Reputation: 201
Re: Call Trace
Originally Posted by
cvthiagu
Hi,
I have done BSS Level Call Trace(********), Even though the Manual says the output is As per the ETSI GSM 12.08 Standards. I could not get much from the GSM 12.08 Pdf. I am not able to decode the Hex Values (what does it mean, Order of Values etc., ) Can any one guide me in this regard
Thanks in Adv
What exactly you are looking in those traces?
-
Member
Reputation: 150
Re: Call Trace
Originally Posted by
cvthiagu
Hi,
I have done BSS Level Call Trace(********), Even though the Manual says the output is As per the ETSI GSM 12.08 Standards. I could not get much from the GSM 12.08 Pdf. I am not able to decode the Hex Values (what does it mean, Order of Values etc., ) Can any one guide me in this regard
Thanks in Adv
You need CTP-GSM software (depends on which BSS software version you are using, GSR8, GSR9, etc.) to decode those hex values.
-
Junior Member
Reputation: 12
Re: Call Trace
Hi Apo7
Is the CTP - GSM is bundled with GSR9 or We have to purchase it
Regards
Last edited by cvthiagu; 2010-07-25 at 09:15 PM
-
Junior Member
Reputation: 12
Re: Call Trace
I have enabled Auto RF loss Trace. I want to know the cause for calls being dropped at a particular place since drive test on road show things are good.
Decoding of MS Report, AMR Report in the call trace( Hex Values ) will help me thats why
-
Member
Reputation: 150
Re: Call Trace
Originally Posted by
cvthiagu
Hi Apo7
Is the CTP - GSM is bundled with GSR9 or We have to purchase it
Regards
Hi,
Sorry for the late reply. I am not sure whether there are any agreements between ******** and the operator for the software to be bundle or not but normally the operator will need to purchase it unless if you are working for ********.
Also, you might need to check the BSS logs just in case maybe there are some alarms which will help you to identify the root cause for the drops.
Regards.
-
Re: Call Trace
hi ,
are you using ******** COP for decoding the CTP traces , which you have enabled on BSC .
Regards,
MAK
-
Junior Member
Reputation: 12
Re: Call Trace
Bookmarks