HYG
https://www.4shared.com/s/ffjbbmh0rea
Type: Posts; User: MAZ29; Keyword(s):
HYG
https://www.4shared.com/s/ffjbbmh0rea
Thanks for your suggestion .. but you know that cost reduction is the new trend these days .......
Currently I work as senior support Engineer For Field Maintenance Teams for one the biggest operators in my country ,, before that I was also technical support Engineer for rollout teams in E*******...
First , I will assume that the site transmission is IP-RAN ,, ie that you using TCU or SIU at site ,, then the cause of this problem can be one of two things :
1- the circuit creation in the...
Dears ;
also make sure of the following points
1- when you format a flash card , always check quick format .
2- always use FAT file system with (default allocation size).
3-always check that...
the easiest solution is to format flash card and install a new software package and Reinstall IDB .... this will solve the problem ..... humidity or heat does not cause this problem .. it's a...
here's ALEX library For PBC 6200 http://www.mediafire.com/download/vrlu5h2vqp2z0zv/7602009_r4b.alx ...
hello ; The Concept of the 3G second carrier can be realized by hardware in two ways ; first by using only one RRU and split the power internally into two carriers for example if you have RRUS 01 B1 ...
The DUW 41 01 has only one LMT Port for Both Ethernet and Serial Communications Access , here's the Pin-out for the cable , plz add reputation if you find it helpful ,,,,,,,,,,,, 34498
i always use the default 17784 ns without problems ...........
DUG 20 never support RUGs only RUSs ,,, so basicly you need DUG 10 to be able to use RUGs 900 or 1800
I think you must add the new E1 at Port C in Master RBS because as far as i know
Ports A,C is used for upstream BSC connection
Ports B,D is used for Downstream RBS connection.
also make...
there are many problems you may face :
1- Poor team competence (result in outage over specified time window , equipment damage , poor installation ...etc )
2- technical problems (alarms , team...
this alarm is resulted from wrong NTP server configuration from integration side .......
if integration failed to resolve this alarm , you have to check NTP server settings from O&M script and see...
do you need the Upgrade package or the ALEX library ?
ok , it's a long story but here's the main issues especially Major work steps :
1- the survey is number one ( survey person must visit the site to determine existing equipment and create detailed...
hi islam :
this is alink to W12 Upgrade , Release R12C
http://www.4shared.com/zip/KFqI7UX8/Upgrade_package_for_W12B_DUW_C.htm
if you are using RRUW or RRUS 01 or RRUS 11 , you need to ((((REMOVE )))) the (right sign ) from (((( RIU ))) ..ie uncheck RIU when you enter ((( Site Script ))) ....
as you are not using RIU with...
if you are sure of VSWR is ok for Cables , then do ( Hard Reset ) ==> turn off the power and wait for about 2 minutes then turn it On again , i had the smae problem and this was the solution...
i got this alarm ( Rx maxgain/mingain violated ) and it's a vicious alarm :@ , i tried every thing , the hardware connections are 1000% correct and the IDB is 1000 % correct , i sweep tested the RF...
connect OMT to DUG 3 and Then Read IDB and then Navigate to { Radio } Tab , Mark on all Check Boxes including {Fault} check box , then you will have the Faulty Connection Marked In RED color , ALSO ,...
if you are going to use all RUs as RUGs , then you can have a configuration as 1X12 TRXs at one cell
The required work from RBS side is to set the IDB correctly and Check E1 Connections Proberly and...