PCTel-LX-scanner firmware dumps request

Hello,

I need firmware file dumps of PCTel LX scanners, from one of the following models:
- Single-Band WCDMA 900 MHz (single receiver)
- Dual-Band WCDMA 2100/900 MHz (single receiver)
- Tri-Band WCDMA 850/900/2100 (dual receiver-06066)
- Quad-Band WCDMA 850/900/1800/1900 (dual receiver-06062)
Actually, interested in single receiver scanners with 1 or 2-bands (existing/activated by SW+HW-means) from one of the following band combinations:
- 900-only
- 900+2100
- 900+1800
- 900+other band
Needed firmware is a dump of internal 2MB-flash of Atmel-ARM7-processor AT91F40416.
I can provide info how to read this dump through service JTAG-port (existing on the PCB).

Regards

I'm adding to the above list the following models:
- Dual-Band WCDMA 850/1900 MHz (single receiver-06004)
- Dual-Band WCDMA 1900/2100 MHz (single receiver-06037)
- Dual-Band WCDMA 850/2100 MHz (single receiver-06060)
- Tri-Band WCDMA 850/1900/2100 (dual receiver-06061)

The actual list becomes:
- Single-Band WCDMA 900 MHz (single receiver)
- Dual-Band WCDMA 2100/900 MHz (single receiver)
- Dual-Band WCDMA 850/1900 MHz (single receiver-06004)
- Dual-Band WCDMA 1900/2100 MHz (single receiver-06037)
- Dual-Band WCDMA 850/2100 MHz (single receiver-06060)
- Tri-Band WCDMA 850/1900/2100 (dual receiver-06061)
- Tri-Band WCDMA 850/900/2100 (dual receiver-06066)
- Quad-Band WCDMA 850/900/1800/1900 (dual receiver-06062)

Does anyone know about the existence of software update for PCtel LX scanners, newer than version 2.5.23.0 ?

Software Information
--------------------------------------------------------------------
Embedded Software Version..........: 2.5.23.0
Boot Software Version..............: 3.1.0.0
DSP Software Type..................: 3GPP WCDMA & GSM
DSP Software Version...............: 2.2.0.33
Clock Card Emb SW Version..........: 8.1

I think newer versions exist. I found some info in the attached document.
5.1.3/DSP SW 2.2.0.39
5.1.3/DSP SW 2.2.0.41
6.6/DSP SW 2.2.0.53

Please share information of your LX scanners (read with See Gull Assistant or Tremos LX Client).

Does anyone have any kind of upgrade/update file for LX scanner, in .dtb-format?

And some more in detail...

Old info: see attachment.

Newer info:
http://www.doc88.com/p-013708117112.html
http://www.doc88.com/p-272403842754.html

Could someone download these documents and upload here?

Thanks.

can't download as text, but has this:

SeeGull LX User Manual Rev.R.pdf
Attachment 41819

SeeGull LX Hardware Reference Manual Rev.X.pdf
Attachment 41820

oh,
no need download and decrypt EBT files from doc88
I found all at my USB disk.

SeeGull LX CDMA 3.7 Release Notes_Rev J.pdf
SeeGull LX CDMA 3.7J Release Notes_Rev B.pdf
SeeGull LX EVDO 1.7 Release Notes_Rev H.pdf
SeeGull LX Hardware Reference Manual.pdf
SeeGull LX iDEN 1.3 Release Notes_Rev D.pdf
SeeGull LX WCDMA-GSM 6.7 Release Notes_Rev O.pdf

Attachment 41824
Attachment 41825
Attachment 41826
Attachment 41827
Attachment 41828

Pctel LX version is not "Embedded Software Version", that is eICD version, check here:

Unit Level Information
--------------------------------------------------------------
PCTEL Device Type..................: LX
Unit ESN...........................: 0196-0xxx
Number of Options..................: 4
Comm Port..........................: 44
eIcd Version.......................: 1.8.0.0


Software Information
--------------------------------------------------------------
Embedded Software Version..........: 4.5.0.5
Boot Software Version..............: 3.1.0.0
DSP Software Type..................: 3GPP WCDMA & GSM
DSP Software Version...............: 2.2.0.53
Clock Card Emb SW Version..........: 0.0


Hardware Information
--------------------------------------------------------------
Hardware Version...................: 4.23.1.1
Digital Version....................: 0.0.0.80
Digital Device Id..................: 20
Gps Card Id........................: 0
Clock Card Logic Version...........: 00
Clock Card Hardware Version........: 00
Clock Card Hardware Type...........: 0
RF Version.........................: 0.0.0.3
RF Device Id.......................: 1