Dears,
Kindly share all 2G/3G parameters and actions you have already tested for coverage limit in both accessibility & handover..
my objective is limiting coverage for special site designed to cover only top security place around 1 km
Printable View
Dears,
Kindly share all 2G/3G parameters and actions you have already tested for coverage limit in both accessibility & handover..
my objective is limiting coverage for special site designed to cover only top security place around 1 km
Dears,
Any idea please !
you can try lower value for "Max TA"
In 2G network has timing advanced information, that show distance from BTS and MS, network can use it to control MS, I mean Max TA can use as reference for your purpose.Quote:
Originally Posted by justdream
In 3G, propagation delay has the same meaning, but I never saw the network can use it to control accessibility or handover of UE. Hence I don't think have any parameters in 3G can prevent UE' accessibility in special area. But you can use "cell reserved" to prevent almost UE to access the network and only allows some classes UE, which need to define can access the network.
in 3G network you can try the parameter :Local Cell Radius
meaning;Indicates the radius of a local cell, affecting cell coverage. It is set according to the network plan. A small cell radius causes user access failure to some or all coverage under certain configuration
Thanks, I forgot. It's Local Cell Radius parameter in Huawei system and cell range in E// system. Both of them is NodeB parameter.Quote:
Originally Posted by oussama85
Defines the maximum range (in meters) for random access detection (random access distance). For soft handover the RBS adds a soft handover margin internally. Note that the actual cell range resolution is 3 chips, that is, around 234 m
Hi
2g..u can try Rxlevelacessmin, sl, msMaxDistInCallSetup
Rgds
Plannerguy
Dear, what is SLQuote:
Originally Posted by plannerguy
and what's the exact name and description of msMaxDistInCallSetup as I didn't find it in Huawei
I tried to enable msMaxDistInCallSetup but it is not working?
Is there any related parameters to activated?
For 2G, you may try ACCMIN
For 3G, how about adjusting the Local Cell Radius
Best Regards
juanpico
How high is the antenna height? You can try and lower the height or increase the tilts to reduce footprint
Hi:
I think you can also try to activate the platinium user class, it is based in the IMSI so you can give high priority to the Platinium users in that cells and very low priority for the gold, silver and bronce users, (it is based in the SPI weight), it doesn't allow the access to the cell to only platinium users 100% but unless there is a high congestion in the network only Platinium will be allowed to use the specific cell, if the SPI weight of normal users is very small they will be redirected to another cells.
You may also try to play with BSTXPWR value to lower it to 42 up to 38, same for BSPWRT/B
best regards
juanpico
Quote:
Originally Posted by justdream
Dears, based on your practical experience
is changing Local cell Radius really make a difference?