Dears,
Do you know about Antenna Tributary Factor Parameters?
and its effect on Path balance
Printable View
Dears,
Do you know about Antenna Tributary Factor Parameters?
and its effect on Path balance
There are 2 tributaries i.e Antenna Tributary 0 & Antenna Tributary 1.
There are also 2 flags by the name Antenna Tributary Flag 0 & Antenna Tributary Flag 1.
If on a particular site TMA is active, then you need to enable these flags and set the proper attenuation factor otherwise you will be experiencing weak DL.
Attenuation factor= TMA gain-4.
For example, if TMA gain is 12 then you have to set Attenuation factor= 8.
Hope this helps.